i1055 - Uncategorized ILUV - Free user manual and instructions
Find the device manual for free i1055 ILUV in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Bluetooth Speaker |
| Brand | iLuv |
| Model Number | i1055 |
| Color Options | Black, White, Red, Blue |
| Dimensions (W x H x D) | 6.3 x 2.1 x 2.1 inches (16 x 5.3 x 5.3 cm) |
| Weight | 10.6 oz (300 g) |
| Bluetooth Version | V5.0 with EDR |
| Wireless Range | Up to 33 ft (10 m) |
| Battery Type | Rechargeable lithium-ion, 1800 mAh |
| Battery Life | Up to 10 hours at 50% volume |
| Charging Time | Approximately 3 hours via micro USB |
| Power Output | 5W RMS |
| Driver Size | 1.8 inch (45 mm) full-range |
| Frequency Response | 100 Hz – 20 kHz |
| Signal-to-Noise Ratio | ≥ 75 dB |
| Connectivity Options | Bluetooth, 3.5mm AUX-in, Micro USB charging |
| Controls | Power, Volume +/- , Play/Pause, Multi-function button |
| Water & Splash Resistance | IPX5 certified |
| Hands-free Speak | Built-in microphone for conference calls |
| What's in the Box | iLuv i1055 speaker, micro USB cable, AUX cable, quick start guide |
| Manufacturer Warranty | 1-year limited warranty |
| Care Instructions | Wipe with a dry, soft cloth; avoid abrasive cleaners |
| Safety Warnings | Do not expose to extreme heat, moisture, or open flame; dispose of battery properly |
| Compatibility | Works with Bluetooth-enabled smartphones, tablets, laptops, and non-Bluetooth devices via AUX |
Frequently Asked Questions - i1055 ILUV
How do I pair the iLuv i1055 with my smartphone?
Turn on the speaker by pressing and holding the Power button until the LED flashes. Activate Bluetooth on your device and select iLuv i1055 from the list of available devices. If prompted for a PIN, enter 0000. The speaker will confirm pairing with an audible tone.
How long does the battery last on a full charge?
The built-in 1800 mAh lithium-ion battery provides up to 10 hours of continuous playback at 50% volume. Actual battery life may vary depending on volume level and audio content.
How do I charge the speaker?
Connect the included micro USB cable to the charging port on the back of the speaker and the other end to a USB wall adapter or computer. The LED indicator will turn red while charging and blue when fully charged. A full charge takes about 3 hours.
What should I do if there is no sound or the speaker is silent?
First, ensure the speaker is turned on and the volume is not muted. Check the Bluetooth connection and confirm the audio source is playing. If using AUX mode, verify the cable is fully inserted. Try re-pairing or resetting the speaker by turning it off and on again.
Can I use the i1055 for phone calls?
Yes, the speaker has a built-in microphone and supports hands-free calling. When a call comes in, press the multi-function button to answer and press again to end. The microphone picks up your voice clearly for conversations.
Is the iLuv i1055 waterproof?
The speaker is IPX5 certified, meaning it is protected against splashing water from any angle. It is not designed for full submersion. Avoid placing it directly under running water or using it in swimming pools or showers.
How do I clean the speaker?
Use a soft, dry cloth to wipe the speaker's surface. For stubborn dirt, lightly dampen the cloth with water. Never use harsh chemicals, solvents, or abrasive pads, as they may damage the finish and the speaker's water-resistant seal.
Can I connect the speaker to a non-Bluetooth device?
Yes, simply plug the included 3.5mm AUX cable into the speaker's AUX port and the other end into your device's headphone jack. The speaker will automatically switch to AUX mode. Note that volume is controlled via the connected device or the speaker controls.
What is the wireless range of the Bluetooth connection?
The Bluetooth V5.0 module supports a stable connection up to 33 feet (10 meters) in open space. Walls, obstacles, and interference from other wireless devices can reduce the range.
How do I reset the speaker if I experience connectivity issues?
Turn off the speaker, then press and hold the Power button for about 10 seconds until the LED flashes rapidly. This clears the pairing memory and resets the speaker. Afterward, re-pair your device as if it were the first time.
User questions about i1055 ILUV
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual i1055 - ILUV and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. i1055 by ILUV.
USER MANUAL i1055 ILUV
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ILUV
Model : i1055
Category : Uncategorized