Kramer

KDS-100EN - AV extender Kramer - Free user manual and instructions

Find the device manual for free KDS-100EN Kramer in PDF.

📄 72 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Kramer KDS-100EN - page 3
Pick your language and provide your email: we'll send you a specifically translated version.
Product type AV extender
Brand Kramer
Model KDS-100EN
Transmission medium CAT5e/CAT6 twisted-pair cable
Max video resolution 4K@60Hz (4:4:4)
Max transmission distance 70 m (230 ft) for 4K, 170 m (560 ft) for 1080p
Video input 1 x HDMI (transmitter), 1 x HDMI (receiver)
Video output 1 x HDMI on the compatible end
Audio support Pass-through of digital audio up to 7.1 channels
HDCP support HDCP 2.3 compliant
Ethernet extension Bidirectional 100 Mbps pass-through
IR control extension Yes, bidirectional IR pass-through
RS-232 extension Bidirectional serial control pass-through
Power supply 5V DC, 2A adapter (included)
Power consumption Max 5W
Dimensions (W x D x H) 18.0 cm x 12.0 cm x 2.5 cm
Weight 0.5 kg
Operating temperature 0°C to 45°C
Mounting Rack-mountable with optional bracket
Installation Plug-and-play, no software required
Maintenance and cleaning Wipe the outer casing with a dry soft cloth; ensure vents are free of dust
Safety Use only the supplied power adapter; keep away from liquids and heat sources
Spare parts and repairability Spare parts are available through Kramer dealers; repair should be performed by certified technicians only
General information Extension of HDMI up to 170 m over standard twisted-pair cabling; ideal for commercial AV installations

Frequently Asked Questions - KDS-100EN Kramer

How do I set up the Kramer KDS-100EN?
Connect the transmitter to your HDMI source (e.g., Blu-ray player) and the receiver to the display. Link both units using a CAT5e or CAT6 cable, plug in the included 5V power adapters, and turn on your devices. The unit is plug-and-play, so no further configuration is needed.
What is the maximum distance I can extend the HDMI signal?
Using high-quality CAT6 cable, the KDS-100EN can transmit 4K signals up to 70 meters and 1080p signals up to 170 meters. For optimal performance, avoid running the cable alongside high-voltage wiring.
Does the KDS-100EN support 4K video?
Yes, it supports 4K at 60Hz with 4:4:4 chroma subsampling, as well as HDCP 2.3, ensuring compatibility with current 4K and UltraHD content.
Can I extend Ethernet over the same cable?
Yes, the unit provides a bidirectional 100 Mbps Ethernet pass-through over the same twisted-pair cable, allowing you to connect a smart TV, media player, or other networked devices.
Is IR control supported?
Yes, the KDS-100EN includes a bidirectional IR pass-through. You can control the source device from the display side or vice versa using compatible IR emitters and receivers (not included).
What type of cable should I use?
Use CAT5e, CAT6, or higher twisted-pair cable with RJ-45 connectors. For 4K signals, shielded CAT6 or CAT7 is recommended to minimize interference and ensure maximum distance.
How do I know if the device is powered on?
Both the transmitter and receiver have a small LED indicator that lights up when power is applied. If the LED is off, check the power adapter and the power outlet.
What should I do if the output image is intermittent or has sparkles?
First, check that all HDMI and twisted-pair connectors are securely seated. Replace the cable with a known-good one, and ensure the total length is within the specified distances. Also confirm that the power supplies are stable and not defective.
Is the KDS-100EN truly plug-and-play?
Yes, it is fully plug-and-play. No drivers or software are required. After powering and connecting, the HDMI source will be recognized automatically by the display.
How do I update the firmware?
The KDS-100EN typically does not require user-accessible firmware updates. If improvements are available, they can be applied by authorized Kramer service centers. Contact your local Kramer distributor for assistance.

User questions about KDS-100EN Kramer

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your AV extender in PDF format for free! Find your manual KDS-100EN - Kramer and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KDS-100EN by Kramer.

USER MANUAL KDS-100EN Kramer

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Kramer

Model : KDS-100EN

Category : AV extender