BAS-7018 - Uncategorized Yamazen - Free user manual and instructions
Find the device manual for free BAS-7018 Yamazen in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Body Composition Scale |
| Brand | Yamazen |
| Model | BAS-7018 |
| Colour | White with clear tempered glass platform |
| Dimensions | 30 x 30 x 2.5 cm (11.8 x 11.8 x 1 in) |
| Weight | 1.4 kg (3.1 lb) |
| Power Supply | 2 x AAA batteries |
| Display | 1.5-inch LCD panel |
| Maximum Capacity | 180 kg / 396 lb / 28 st 4 lb |
| Measurement Increments | 0.1 kg / 0.2 lb |
| Weight Unit Selection | kg / lb / st, switchable |
| Body Composition Data | Body fat, BMI, muscle mass, bone mass, water percentage and BMR |
| User Memory | Up to 10 individual profiles |
| Automatic Features | Step-on activation, auto zero, auto shut-off |
| Safety Features | Overload protection, non-slip pads, tempered glass platform |
| Included Accessories | Instruction manual |
| Maintenance | Wipe with a soft damp cloth; do not immerse in water |
| Spare Parts & Repairability | User-replaceable batteries; internal repairs by qualified technicians |
| General Information | For household use on flat, hard surfaces |
Frequently Asked Questions - BAS-7018 Yamazen
How do I set up the Yamazen BAS-7018 body composition scale for the first time?
Remove the protective film, flip the scale over, and open the battery compartment on the back. Insert two AAA batteries with the correct polarity, close the cover, and place the scale on a flat, hard surface. Tap the glass platform with your foot to wake up the scale, then wait until the display shows 0.0 before stepping on.
Why does the displayed weight differ slightly from my previous reading?
The scale is sensitive to surface and posture. For consistent results, use it on the same flat and hard floor, place your feet evenly on the sensor area, and weigh yourself at the same time of day. Avoid moving or leaning while the measurement is being taken.
Can the base unit be switched from kilograms to pounds?
Yes. While the scale is off, press the unit button at the bottom or side of the scale, if present, to cycle through kg, lb and st. The selected unit will appear on the LCD display and is stored in memory for the next use.
What should I do if the scale shows 'Err' or 'Overload'?
If the display shows Err, a weighing error may have occurred: stand up straight with both feet on the center of the platform and try again. If it shows Overload, the object exceeds the maximum capacity of 180 kg / 396 lb; remove the load immediately to protect the sensor.
How do I use the body composition analysis mode?
Step on the scale with bare feet, making sure your feet are dry and in contact with the metal electrodes. Hold still until the body fat percentage, BMI and other indicators are displayed. For greatest accuracy, avoid measuring after intense exercise or a large meal.
How should I clean the glass platform?
Clean the platform with a soft damp cloth, then dry it with a soft dry towel. Do not use abrasive cleaners, solvents, or soak the scale in water. Remove the batteries before cleaning if you wish to wipe near the display area.
Is the glass platform resistant enough for daily use?
The platform is made from tempered safety glass that is designed to withstand normal household loads up to 180 kg. Non-slip feet keep the scale stable on smooth floors. Avoid dropping heavy objects on the glass to prevent damage.
How do I replace the batteries?
When the battery symbol appears or the display fades, open the compartment on the underside and remove the old two AAA batteries. Insert fresh batteries following the +/- marks, close the cover, and reset the scale if necessary.
Can multiple people use this scale with their own data?
The BAS-7018 includes memory slots for up to 10 different users. Each user can save their age, height and target data, then select their own profile when measuring so that body composition calculations are personalized.
What should I do if the scale does not turn on?
First check that the batteries are correctly installed and fresh. If the display stays blank, remove the batteries for 10 seconds, reinsert them, and press the platform lightly to switch on. If the scale still does not respond, contact qualified support for repair or battery replacement.
User questions about BAS-7018 Yamazen
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual BAS-7018 - Yamazen and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BAS-7018 by Yamazen.
USER MANUAL BAS-7018 Yamazen
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Yamazen
Model : BAS-7018
Category : Uncategorized