Williamsburg 1057-AGB - Ignition Hudson Valley - Free user manual and instructions
Find the device manual for free Williamsburg 1057-AGB Hudson Valley in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Hudson Valley |
| Model | Williamsburg 1057-AGB |
| Product Type | Gas Lantern with Ignition |
| Finish | Antique Gas Bronze |
| Material | Cast Aluminum |
| Glass Type | Clear beveled glass |
| Mounting Type | Wall mount |
| Fuel Type | Natural gas or propane |
| Ignition System | Electronic spark ignition |
| Number of Burners | One |
| BTU Rating | Approx. 25,000 BTU |
| Dimensions | 27.5" H x 15.75" W x 9.5" D |
| Weight | 32 lbs |
| Power Source | Gas supply line |
| Usage Location | Outdoor, covered porch or patio |
| Certifications | CSA listed |
| Operation | Remote control ready |
| Maintenance | Clean glass and inspect burner annually |
| Repair Parts | Replacement igniter and glass available |
| Warranty | 1-year limited warranty |
Frequently Asked Questions - Williamsburg 1057-AGB Hudson Valley
How do I install the Williamsburg 1057-AGB gas lantern?
Installation should be performed by a licensed gas professional. Ensure the gas supply is off, mount the bracket to a wall stud, connect the gas line to the valve, and install the electronic igniter bracket. Refer to the instruction manual for torques and clearance requirements.
Can I use propane instead of natural gas?
Yes, this lantern is convertible. Use the conversion kit included and adjust the burner Venturi according to the gas type. Always perform a leak test before use.
What is the required clearance?
Maintain at least 18 inches clearance from combustible materials to the top and sides, and 36 inches below the lantern.
How does the ignition work?
The electronic spark igniter creates a spark at the burner electrode when the switch is pressed, lighting the pilot or main burner. Ensure the batteries are charged or the low-voltage transformer is connected.
Why does the flame flicker?
Flickering can be caused by wind, low gas pressure, or a dirty burner orifice. Adjust the flame pattern with the air shutter and clean the ports.
How do I clean the glass?
Wait until the lantern cools, then wipe the glass with a soft cloth and mild glass cleaner. Do not use abrasive materials that could scratch the glass.
What maintenance is needed annually?
Inspect the gas lines for leaks, check all gaskets, clean the burner and ignite, and replace worn electrodes if needed.
Can I use a timer or smart switch?
Yes, the igniter can be wired to a wall timer or smart home module if rated for the required current.
What if the igniter does not spark?
First check the power supply or battery. If the electrode gap is not 0.2 inches, adjust it. Also ensure the electrode is clean and free of corrosion.
Is the lantern weatherproof?
The lantern is designed for wet locations, but prolonged rain exposure may require the top shield to be in place. Install under an eave for best performance.
User questions about Williamsburg 1057-AGB Hudson Valley
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Ignition in PDF format for free! Find your manual Williamsburg 1057-AGB - Hudson Valley and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Williamsburg 1057-AGB by Hudson Valley.
USER MANUAL Williamsburg 1057-AGB Hudson Valley
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hudson Valley
Model : Williamsburg 1057-AGB
Category : Ignition