AXI-HA16P-R - Uncategorized AXESS - Free user manual and instructions
Find the device manual for free AXI-HA16P-R AXESS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Car Audio Interface Module |
| Brand | AXESS |
| Model | AXI-HA16P-R |
| Compatibility | Select Hyundai and Kia vehicles |
| Input Voltage | 12V DC |
| Operating Voltage Range | 10.5 - 16V DC |
| Current Draw | 0.5A max |
| Dimensions (L x W x H) | 3.5 x 2.5 x 1.0 in |
| Weight | 4.2 oz (120 g) |
| Housing Material | ABS Plastic |
| Connector Type | ISO/JASO |
| Cable Length | 1 ft (30 cm) |
| LED Indicator | Power/Status LED |
| Audio Output | RCA pre-amp outputs |
| Steering Wheel Control | Retains factory audio buttons |
| Installation | Plug-and-play, no wire cutting |
| Protection | Built-in fuse and ISO certification |
| Operating Temperature | -30°C to +80°C |
| Storage Temperature | -40°C to +85°C |
| Warranty | 1-year limited warranty |
| Maintenance | Wipe with dry cloth; avoid liquids |
Frequently Asked Questions - AXI-HA16P-R AXESS
How do I install the AXESS AXI-HA16P-R?
Installation is plug-and-play. Connect the harness to your vehicle's wiring and the aftermarket stereo. Ensure the ignition is off during installation. All connections are color-coded.
Is the AXI-HA16P-R compatible with my car?
This interface is designed for select Hyundai and Kia vehicles. Consult the vehicle fitment guide or the manual's compatibility chart to verify your model year and trim.
Does it retain my steering wheel audio controls?
Yes, the AXI-HA16P-R retains factory steering wheel buttons, including volume, track, and source, when used with a compatible aftermarket receiver. It also supports programmable button mapping.
Why is there no power coming from the interface?
Check the vehicle's fuse for the accessory circuit. The interface has a built-in fuse; replace it if blown. Ensure the ignition switch is in the ACC or ON position.
Can the interface be used with a non-branded stereo?
The interface is compatible with most aftermarket head units that have a wired remote input. Verify that your stereo supports steering wheel control input before installation.
How do I reset the AXI-HA16P-R?
Disconnect the device from the vehicle's power for at least 10 seconds, then reconnect. This will reboot the interface and clear any temporary glitches.
The LED light is not illuminated. What should I do?
Verify that the harness connections are secure and that the ignition is on. If the LED still does not light, test the vehicle's wiring with a multimeter to confirm power and ground.
Is the AXI-HA16P-R a plug-and-play device?
Yes, it is designed for a direct connection using standard ISO connectors, so you do not need to splice or cut any wires in most cases.
What is the warranty duration?
AXESS provides a one-year limited warranty against manufacturing defects. Register your product on the AXESS website for an extended warranty.
Can I update the firmware of this interface?
This model does not require firmware updates. It is programmed at the factory and does not support user updates. If you need updates, contact AXESS support.
User questions about AXI-HA16P-R AXESS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual AXI-HA16P-R - AXESS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AXI-HA16P-R by AXESS.
USER MANUAL AXI-HA16P-R AXESS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AXESS
Model : AXI-HA16P-R
Category : Uncategorized