NMX-ENC-N1133A - Uncategorized AMX - Free user manual and instructions
Find the device manual for free NMX-ENC-N1133A AMX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Video Encoder |
| Brand | AMX |
| Model | NMX-ENC-N1133A |
| Video Input | 1x HDMI |
| Video Output | IP (Ethernet) |
| Maximum Resolution | 1920x1080p @ 60 Hz |
| Video Compression | H.264 / AVC |
| Audio Support | Embedded audio, stereo |
| Network Interface | 1x RJ-45 10/100/1000 Ethernet |
| Power Supply | 5V DC, 3A |
| Power Consumption | 15 W max |
| Dimensions (W x D x H) | 15.2 cm x 10.8 cm x 3.8 cm |
| Weight | 0.9 kg |
| Mounting | Desktop or wall mount optional |
| Control Interface | Web GUI, REST API |
| LED Indicators | Power, Link, Video Status |
| Operating Temperature | 0 °C to 40 °C |
| Storage Temperature | -20 °C to 60 °C |
| Certifications | FCC, CE |
| Maintenance | Keep vent clean; do not cover device |
| Spare Parts | Power adapter, HDMI cable |
Frequently Asked Questions - NMX-ENC-N1133A AMX
How do I reset the NMX-ENC-N1133A to factory defaults?
To reset the NMX-ENC-N1133A to factory defaults, press and hold the rear-panel Reset button for 10 seconds while the device is powered on. The device will reboot and restore all settings to their original factory values.
How do I configure the encoder for streaming?
Use the web interface to configure the encoder. Connect to the device's IP address in a browser, go to the Streaming section, set the H.264 bitrate and resolution, then select the desired multicast or unicast stream settings.
What software is required to view the stream?
You can view the stream using any H.264-compatible player such as VLC media player, or use AMX's own NCM (Network Configuration Manager) software for integrated management.
Can the device be powered via PoE?
The NMX-ENC-N1133A supports 5V DC power only. PoE (Power over Ethernet) is not available on this model. Use the included AC adapter to power the device.
How do I update the firmware?
To update firmware, download the latest firmware file from AMX's official website. In the web interface, navigate to Administration > Firmware Update, upload the file, and reboot the device.
What is the maximum cable length for HDMI input?
The HDMI input supports standard HDMI cables up to 15 meters (50 feet) without signal degradation. For longer distances, use an HDMI extender or active cable.
Does the device support HDCP?
Yes, the device supports HDCP for protected content. However, to stream copyright-protected content, you must ensure that all receiving endpoints are also HDCP-compliant.
How do I connect multiple encoders to a network?
Connect each encoder to your network switch using a Cat5e or better cable. Assign a unique IP address to each device via DHCP or static setup. Use the AMX NCM software to manage multiple units.
What are the IP settings by default?
The default IP address is 192.168.1.168 with subnet mask 255.255.255.0. The default username and password are 'admin' and 'password' respectively. Change these after initial login.
How do I troubleshoot no video signal?
If no video signal appears, verify that the HDMI source is powered and connected. Check if the video format is supported (1080p max). Ensure the network stream is being received by a compatible player and that the IP addresses are reachable.
User questions about NMX-ENC-N1133A AMX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual NMX-ENC-N1133A - AMX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NMX-ENC-N1133A by AMX.
USER MANUAL NMX-ENC-N1133A AMX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AMX
Model : NMX-ENC-N1133A
Category : Uncategorized