BT-500 v2.0 - Bluetooth Music Receiver Heritage Audio - Free user manual and instructions
Find the device manual for free BT-500 v2.0 Heritage Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Bluetooth Music Receiver |
| Brand | Heritage Audio |
| Model | BT-500 v2.0 |
| Bluetooth version | Bluetooth 5.0 |
| Wireless range | Up to 10 m / 33 ft |
| Supported audio codecs | aptX, aptX Low Latency, AAC, SBC |
| Audio output | Stereo RCA line out |
| Power supply | 5 V DC via USB cable |
| Power consumption | 0.5 W typical |
| Dimensions (approx.) | 90 x 60 x 22 mm |
| Weight (approx.) | 120 g |
| Compatibility | Phones, tablets, computers, stereo amplifiers |
| Primary function | Stream high-quality music wirelessly to an existing sound system |
| Controls | Pairing button and volume control |
| LED indicator | Shows power and pairing status |
| Installation | Plug-and-play, no driver required |
| Maintenance and cleaning | Clean with a soft, dry cloth; avoid water, solvents and aerosols |
| Safety | Do not expose to liquid, moisture or heat sources; use only an approved 5 V USB adapter |
| Spare parts and repairability | Contact Heritage Audio support for approved spare parts and repairs |
| Box contents | BT-500 v2.0, USB power cable, user manual |
| Warranty | 12 months limited warranty |
| General information | Free PDF user manual available on notice-facile.com |
Frequently Asked Questions - BT-500 v2.0 Heritage Audio
How do I pair my Bluetooth device with the BT-500 v2.0?
Press and hold the pairing button until the LED flashes rapidly. Activate Bluetooth on your phone or tablet and select BT-500 v2.0 from the list. If prompted, enter 0000 as the PIN.
Can I use the BT-500 v2.0 with a home stereo that has no Bluetooth?
Yes. Connect the RCA outputs of the receiver to the aux or line inputs of your amplifier or stereo. Then pair your phone to enjoy wireless streaming.
Which Bluetooth version and codecs are supported?
The BT-500 v2.0 uses Bluetooth 5.0 and supports aptX, aptX Low Latency, AAC and SBC for clearer and more synchronized audio.
What is the maximum wireless range?
In open line-of-sight conditions, the range reaches approximately 10 meters (33 feet). Walls and wireless interference can reduce the effective distance.
Does the receiver work with both iPhone and Android devices?
Yes, it works with any Bluetooth-enabled device, including iOS and Android smartphones, tablets and computers.
How do I charge or power the BT-500 v2.0?
Connect it to a 5 V USB power source using the included cable. The unit can be powered by a USB wall adapter, power bank or computer USB port; it is not battery-powered.
How can I fix frequent dropouts or pairing problems?
Place the receiver closer to the audio source, remove obstacles and reboot both devices. Make sure the Bluetooth firmware on your phone is up to date, and avoid operating near Wi-Fi routers or microwaves.
Can I connect two devices at the same time?
This model is designed primarily for one active connection. To switch to another phone, put the receiver back into pairing mode and connect the new device.
How do I clean and maintain the receiver?
Unplug the unit before cleaning. Wipe it with a soft, dry, lint-free cloth. Never use water, abrasives or chemical solvents, and keep ventilation openings free of dust.
What should I do if the receiver is not delivering sound?
Check that the RCA cables are firmly connected to the stereo, the stereo is set to the correct input source, the phone volume is turned up, and the receiver shows a solid LED after pairing.
User questions about BT-500 v2.0 Heritage Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Bluetooth Music Receiver in PDF format for free! Find your manual BT-500 v2.0 - Heritage Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BT-500 v2.0 by Heritage Audio.
USER MANUAL BT-500 v2.0 Heritage Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Heritage Audio
Model : BT-500 v2.0
Category : Bluetooth Music Receiver