ESC700 G3 - Workstation ASUS - Free user manual and instructions
Find the device manual for free ESC700 G3 ASUS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Enterprise Workstation |
| Brand | ASUS |
| Model | ESC700 G3 |
| Form Factor | Tower workstation chassis |
| Supported Processors | Intel Xeon E5-2600 v3/v4 family |
| Chipset | Intel C612 PCH |
| Memory Capacity | Up to 512GB DDR4 ECC RDIMM/LRDIMM |
| DIMM Slots | 16 |
| Expansion Slots | 9 PCIe 3.0 slots (8 x16, 1 x8) |
| Storage Bays | 8 hot-swap 3.5-inch bays (SATA/SAS) |
| Networking | Dual Intel I210AT GbE ports |
| Power Supply | 1000W 80+ Platinum redundant PSU |
| Dimensions (WxDxH) | 220 x 500 x 480 mm |
| Weight | 18 kg (typical configuration) |
| Cooling | 4x 92mm system fans with speed control |
| Monitoring | ASUS Server Management Board with AMT |
| Maintenance | Tool-less side panel access for easy cleaning |
| Cleaning | Use a dry, lint-free cotton cloth on exterior surfaces |
| Safety | Overload protection and tamper-proof lock on chassis |
| Spare Parts & Repairability | Replacement fans, PSUs, and drive caddies available from ASUS service centers |
| General Information | User manual available for free download on ASUS support page |
Frequently Asked Questions - ESC700 G3 ASUS
How to reset the BIOS on the ASUS ESC700 G3?
To reset the BIOS, power off the system and unplug it. Open the chassis and locate the CMOS header (labeled CLRTC). Use a jumper cap to short pins 1-2 for about 10 seconds. Alternatively, remove the onboard battery for 30 seconds. Restore the jumper and reboot. The BIOS will be restored to factory defaults. Always disconnect all power before performing this procedure.
Which processors are supported by the ESC700 G3?
The ESC700 G3 supports Intel Xeon E5-2600 v3 and v4 series processors in socket LGA 2011-3. This includes models with up to 22 cores and a TDP of up to 160W. Always check the CPU QVL list on the ASUS website before upgrading.
What is the maximum memory capacity?
The motherboard features 16 DIMM slots and can hold up to 512GB of DDR4 ECC RDIMM or LRDIMM modules. For best performance, install modules in groups of 4 or 8 and follow the color-coded slots on the board.
Can I add more storage drives?
Yes, the chassis includes 8 hot-swap 3.5-inch bays that support SATA or SAS drives with an optional HBA. Also, internal 2.5-inch mounts are available for SSDs. The drives are hot-swappable when configured with an appropriate RAID controller.
How do I access the remote management interface?
The ESC700 G3 includes an embedded ASMB8 management board. Connect the dedicated BMC LAN port to your network, then use a web browser to access the default IP (192.168.1.10) or discover it via ASUS Utilities. The default login credentials are printed on the chassis label.
Which operating systems are officially supported?
The workstation supports Windows Server 2016/2019, Red Hat Enterprise Linux, SuSE Linux Enterprise Server, and Ubuntu LTS. For up-to-date driver and certification information, refer to the ASUS download page.
Why is there no display on the monitor?
First, ensure that graphics cards are properly seated in the PCIe slots and that auxiliary power cables are connected. If you are using onboard VGA output, note that it is disabled when a discrete GPU is present. Reseat the memory modules and clear the CMOS if the system doesn't post.
How to replace the power supply unit?
Turn off the system and disconnect all cables. Remove the side panel and locate the 1000W 80+ Platinum redundant PSU at the back. Release the mounting screws and slide out the unit. Insert the replacement, ensuring it locks with a click, and reconnect all power cables. Ensure the PSU is compatible with the ESC700 G3.
How should I clean the workstation?
Use a soft dry cloth for the exterior and a can of compressed air to blow out dust from the fans and heatsinks. Do not use vacuum cleaners or liquid cleaners. Clean the intake filters monthly if present. Always power down and unplug the unit before any deep cleaning.
How do I update the BIOS firmware?
Download the latest BIOS file from the ASUS support website and extract it to a USB flash drive. Boot the system and press Enter keys during memory check to enter the BIOS EZ Flash utility. Select the file from the USB drive and confirm the update. Do not power off the system during the flashing process.
User questions about ESC700 G3 ASUS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Workstation in PDF format for free! Find your manual ESC700 G3 - ASUS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ESC700 G3 by ASUS.
USER MANUAL ESC700 G3 ASUS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ASUS
Model : ESC700 G3
Category : Workstation