X12SCV-W - Motherboard Supermicro - Free user manual and instructions
Find the device manual for free X12SCV-W Supermicro in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Motherboard for servers and workstations |
| Brand | Supermicro |
| Model | X12SCV-W |
| Form Factor | Mini-ITX |
| Supported Processor | Intel Xeon E-2300 series (LGA1200) |
| Chipset | Intel C256 |
| Memory Slots | 4 DIMM slots |
| Memory Type | DDR4 ECC UDIMM up to 3200 MHz |
| Expansion Slots | 1 x PCIe 4.0 x16, 1 x PCIe 4.0 x8 |
| Storage Interfaces | 6 x SATA3, 2 x M.2 (NVMe/SATA) |
| Networking | 2 x 10GbE LAN (Intel X550) |
| USB Ports | 4 x USB 3.2 Gen2, 4 x USB 3.2 Gen1 |
| Power Connectors | 24-pin ATX, 8-pin EPS 12V |
| Operating Temperature | 0°C to 45°C |
| Dimensions | 170 mm x 170 mm |
| Weight | Approximately 1.2 kg |
| Power Supply Requirements | Standard ATX power supply unit (not included) |
| Main Features | Supports IPMI 2.0 remote management, TPM 2.0, multi-GPU support |
| Maintenance and Cleaning | Use dry cloth or compressed air; avoid liquid cleaners |
| Safety Precautions | Handle with care, discharge static electricity before installation |
| Spare Parts and Repairability | Available from official distributors; PCB and connectors sold separately |
| General Information | RoHS compliant, CE/FCC certified |
Frequently Asked Questions - X12SCV-W Supermicro
What processors are compatible with the X12SCV-W motherboard?
The board supports Intel Xeon E-2300 series processors based on the LGA1200 socket. Check the official compatibility list before purchase.
How many memory modules can be installed?
It has 4 DIMM slots supporting DDR4 ECC UDIMM memory up to a maximum of 128GB (32GB per module). Ensure the modules are on the QVL for best stability.
Does the motherboard have integrated graphics?
The X12SCV-W does not include integrated graphics. A dedicated GPU is required for video output. It supports optional IPMI via the baseboard management controller.
What power supply is recommended?
Use a standard ATX PSU with a 24-pin main connector and an 8-pin EPS CPU connector. The exact wattage depends on the installed CPU and peripherals, but a quality 500W or higher unit is advised.
How to update the BIOS?
Download the latest BIOS from Supermicro's website, copy it to a FAT32 USB drive, and use the BIOS Flash utility or the Supermicro Update Manager. Always ensure a stable power supply during the process.
Can I use M.2 NVMe drives?
Yes, the board has two M.2 connectors supporting both NVMe and SATA SSDs. Note that one slot may share bandwidth with PCIe lanes, so check the manual for configuration.
How to connect front panel buttons and LEDs?
Refer to the motherboard manual for the pinout. The front panel header is usually located at the bottom right corner. Connect power switch, reset, and LED leads according to the silkscreen markings.
Does the motherboard support error-correcting code memory?
Yes, it supports ECC UDIMM memory. ECC provides advanced error detection and correction, enhancing system reliability for workstations and servers.
What is the warranty period?
Supermicro offers a 3-year warranty on this motherboard. Register the product after purchase to access full technical support.
How should I clean the motherboard?
Power off and disconnect all cables, use compressed air to remove dust, and wipe with a soft, dry cloth. Do not use water or cleaning agents, as they may damage the components.
User questions about X12SCV-W Supermicro
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Motherboard in PDF format for free! Find your manual X12SCV-W - Supermicro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. X12SCV-W by Supermicro.