CyberPower

LE825DG - Inverter CyberPower - Free user manual and instructions

Find the device manual for free LE825DG CyberPower in PDF.

📄 2 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice CyberPower LE825DG - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Standby Uninterruptible Power Supply (UPS)
Brand CyberPower
Model LE825DG
Rated Power 825 VA / 450 W
Input Voltage 120 VAC
Output Voltage 120 VAC
Input Frequency 60 Hz ± 3 Hz
Number of Outlets 8 NEMA 5-15R
USB Charging Port Yes, 1 port
Surge Protection 1080 Joules
Battery Type Sealed lead-acid, replaceable
Battery Runtime (Half Load) Approximately 5 minutes
Battery Runtime (Full Load) Approximately 1 minute
Transfer Time 4-8 milliseconds
Dimensions (L x W x H) 10.5 x 5.2 x 12.2 inches
Weight 10.4 lbs (4.7 kg)
Operating Temperature 32°F to 104°F (0°C to 40°C)
Safety Certifications UL, cUL, FCC
Maintenance Clean with a dry cloth; ensure proper ventilation
Repairability Replacement battery available for purchase

Frequently Asked Questions - LE825DG CyberPower

How do I connect devices to the CyberPower LE825DG UPS?
Connect your critical devices (computer, monitor, router) to the 8 NEMA 5-15R outlets. Plug the UPS into a wall outlet and press the power button to turn it on.
What is the runtime of the LE825DG during a power outage?
At half load (225W), the runtime is approximately 5 minutes. At full load (450W), it lasts about 1 minute, giving you time to save your work and shut down safely.
How do I replace the battery in the CyberPower LE825DG?
The battery is user-replaceable. Open the battery compartment on the bottom or side, disconnect the old battery connectors, and install a new sealed lead-acid battery of the same type. Refer to the manual for detailed steps.
Does the LE825DG protect against power surges?
Yes, the LE825DG offers 1080 Joules of surge protection for connected equipment, shielding against voltage spikes and surges.
Can the UPS be used with a generator?
The LE825DG is designed for standard utility power. Using a generator may cause frequency fluctuations that could affect performance. It is not recommended unless the generator provides stable, clean power.
What should I do if the UPS does not turn on?
First, ensure the UPS is plugged into a working outlet and the power button is pressed. Check for tripped circuit breakers on the UPS. If the problem persists, the battery may be discharged or need replacement.
How do I clean and maintain the LE825DG?
Unplug the UPS and wipe the exterior with a soft, dry cloth. Do not use liquids or aerosols. Keep the vents unobstructed to ensure proper airflow and cooling.
Does the LE825DG have a USB port?
Yes, it has a USB charging port for charging smartphones, tablets, and other mobile devices. It does not provide data communication with a computer unless connected via a USB cable to the UPS port (if supported).
What is the transfer time during a power failure?
The transfer time is 4-8 milliseconds, which is fast enough to keep electronics running without interruption during a blackout or voltage dip.
Is the CyberPower LE825DG suitable for gaming PCs?
Yes, with 450W of output power, it can support a typical gaming PC and monitor. Ensure your total power draw does not exceed 450W to avoid overloading the UPS.

User questions about LE825DG CyberPower

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Inverter in PDF format for free! Find your manual LE825DG - CyberPower and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LE825DG by CyberPower.

USER MANUAL LE825DG CyberPower

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : CyberPower

Model : LE825DG

Category : Inverter