D32164T - Security Camera FLIR - Free user manual and instructions
Find the device manual for free D32164T FLIR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Outdoor IP Security Camera |
| Brand | FLIR |
| Model | D32164T |
| Image Sensor | 1/1.8-inch Progressive Scan CMOS |
| Max Resolution | 3840 x 2160 (4K Ultra HD) |
| Frame Rate | 30 fps |
| Lens | Fixed 3.6mm |
| Field of View | 78 degrees horizontal |
| Night Vision | Smart IR up to 30m |
| Video Compression | H.265, H.264, MJPEG |
| Network Interface | 10/100 Ethernet with PoE support |
| Protection | IP67 weatherproof housing |
| Storage | MicroSD card slot up to 128GB |
| Dimensions (W x H x D) | 16.0 cm x 14.0 cm x 12.0 cm |
| Weight | 1.2 kg |
| Power | PoE IEEE 802.3af or 12V DC |
| Operating Temperature | -40°C to 60°C |
| Maintenance | Clean lens with a soft, dry cloth |
| Safety | Use a certified power adapter and ensure proper grounding |
| Spare Parts | Modular design; replacement parts available via service manual |
Frequently Asked Questions - D32164T FLIR
How do I reset the FLIR D32164T camera to factory defaults?
To reset the camera, press and hold the reset button on the camera for 10 seconds while powered. The camera will reboot with default settings. The default IP address is 192.168.1.100 with admin/admin credentials.
What is the default login for the camera?
The default username and password are both 'admin' in lowercase. Change the password immediately after first login to secure your camera.
How can I mount the camera outdoors?
The D32164T is IP67 rated, so it can be mounted outdoors. Use the included mounting bracket and ensure all cable glands are tightened to prevent water ingress.
Does the camera support ONVIF?
Yes, the camera is ONVIF Profile S conformant, allowing integration with most VMS software and recorders.
How do I update the camera firmware?
Go to Configuration - System - Maintenance - Upgrade. Upload the provided firmware file and confirm. Do not disconnect power during the upgrade.
What microSD card class is recommended?
Use a Class 10 microSD card up to 128GB for reliable recording. Format the card to FAT32 before inserting.
How to set up motion detection alerts?
Navigate to Configuration - Events - Motion Detection. Enable motion, draw detection zones, and set sensitivity. Then configure notification via email or FTP in the event settings.
Can I power the camera via PoE?
Yes, the camera supports Power over Ethernet (PoE IEEE 802.3af). Connect it to a PoE switch or injector to supply both data and power over a single cable.
How do I access the camera remotely over the internet?
Set up port forwarding on your router for port 80 (HTTP) or 554 (RTSP) to the camera IP. Alternatively, register the camera to a cloud service if available.
What maintenance does the camera require?
Periodically inspect the camera for dust, moisture, or debris. Clean the lens with a soft dry cloth. Ensure the firmware is up to date and check for any loose connections.
User questions about D32164T FLIR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual D32164T - FLIR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. D32164T by FLIR.
USER MANUAL D32164T FLIR
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : FLIR
Model : D32164T
Category : Security Camera