M82776 - Weather Station LA CROSSE TECHNOLOGY - Free user manual and instructions
Find the device manual for free M82776 LA CROSSE TECHNOLOGY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Weather Station |
| Brand | La Crosse Technology |
| Model | M82776 |
| Display Type | LCD with backlight |
| Indoor Temperature Range | 0°C to 50°C (32°F to 122°F) |
| Outdoor Temperature Range | -40°C to 60°C (-40°F to 140°F) |
| Humidity Range | 1% to 99% RH |
| Transmission Frequency | 433 MHz |
| Maximum Wireless Range | 100 meters (328 feet) |
| Power Supply (Main Unit) | 2 x AAA 1.5V batteries |
| Power Supply (Sensor) | 2 x AA 1.5V batteries |
| Main Unit Dimensions | 120 x 120 x 25 mm |
| Sensor Dimensions | 50 x 30 x 100 mm |
| Main Unit Weight | 200 g |
| Sensor Weight | 50 g |
| Functions | Indoor/outdoor temperature, humidity, min/max memory, weather forecast, clock with calendar |
| Mounting | Wall mountable or free-standing |
| Maintenance | Clean with soft, dry cloth; avoid moisture and solvents |
| Safety | Use fresh alkaline batteries; dispose of properly |
| Spare Parts & Repairability | User-replaceable batteries; optional additional sensors |
| Compliance | CE certified |
| Warranty | 1 year limited warranty |
Frequently Asked Questions - M82776 LA CROSSE TECHNOLOGY
How do I set up my La Crosse Technology M82776 weather station?
To set up your weather station, insert batteries into the outdoor sensor first, then into the main unit. The display will show indoor readings immediately. Place the sensor outside within 100 meters of the main unit. The wireless connection will be established automatically within a few minutes. Ensure the sensor is in a shaded, dry location for accurate readings.
How do I reset the weather station?
To reset the main unit, remove the batteries and press any button for 10 seconds to discharge residual power. Insert fresh batteries again. For the sensor, do the same. This restores factory defaults and clears all stored data.
Why isn't my outdoor sensor transmitting data?
Check that the sensor batteries are inserted correctly and have sufficient charge. Move the sensor closer to the main unit, avoiding thick walls or metal obstacles. Ensure both devices are in the same transmission range. If the issue persists, perform a full reset on both units.
How do I change the batteries in the sensor?
Open the battery compartment on the back of the outdoor sensor. Remove the old batteries and insert two new AA alkaline batteries, matching the polarity markings. Close the compartment securely. The sensor will automatically reconnect to the main unit.
Can I connect more than one sensor to this station?
Yes, the M82776 supports additional optional sensors. You can pair extra sensors via the main unit's setup menu. Each sensor transmits on the same 433 MHz frequency but with a unique ID. This allows monitoring multiple locations.
How do I clear the minimum and maximum records?
Press and hold the 'MIN/MAX' button for about 5 seconds until the display resets. This clears all recorded minimum and maximum temperature and humidity values. Alternatively, you can individually view and clear by pressing the button repeatedly.
Where should I place the outdoor sensor?
Place the sensor in a shaded area, ideally on a north-facing wall or under an eave. Avoid direct sunlight, rain, and proximity to metal surfaces or heat sources. The sensor should be at least 1.5 meters above the ground to prevent splashing water interference.
How do I set the atomic time on this device?
The atomic clock receives a time signal from WWVB (USA) or DCF-77 (Europe). After battery insertion, the clock automatically searches for the signal. If not received, press and hold the 'TIME' button for 3 seconds to manually start a search. During the night, the signal is stronger.
What type of batteries should I use?
The main unit requires 2 x AAA 1.5V alkaline batteries. The outdoor sensor requires 2 x AA 1.5V alkaline batteries. Do not use rechargeable batteries unless they are specifically designed for weather stations, as they may provide lower voltage.
How do I clean and maintain the weather station?
Use a soft, dry cloth to gently wipe the display and housing. Do not use water, cleaning solvents, or abrasive materials. Regularly check that the sensor is free of debris and spider webs. Remove batteries during long periods of non-use to prevent corrosion.
User questions about M82776 LA CROSSE TECHNOLOGY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Weather Station in PDF format for free! Find your manual M82776 - LA CROSSE TECHNOLOGY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. M82776 by LA CROSSE TECHNOLOGY.
USER MANUAL M82776 LA CROSSE TECHNOLOGY
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : LA CROSSE TECHNOLOGY
Model : M82776
Category : Weather Station