SCB-5005 - Security Camera Hanwha - Free user manual and instructions
Find the device manual for free SCB-5005 Hanwha in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera |
| Brand | Hanwha |
| Model | SCB-5005 |
| Image Sensor | 1/3" CCD |
| Horizontal Resolution | 600 TV lines |
| Minimum Illumination | 0.1 Lux (at F1.2) |
| Lens Mount | CS mount (with auto iris) |
| Video Output | Composite video 1.0 Vp-p / 75 ohms |
| White Balance | Auto / Manual |
| Backlight Compensation | BLC on/off (selectable) |
| Power Supply | 12V DC ±10% |
| Power Consumption | Approx. 3W |
| Dimensions (WxHxD) | 128 x 60 x 50 mm |
| Weight | Approx. 250 g |
| Operating Temperature | -10°C to +50°C |
| Sync System | Internal |
| Cleaning Instructions | Wipe gently with a soft, dry cloth |
| Safety Precautions | Use the specified power adapter and avoid exposure to moisture |
| Spare Parts & Repairability | Replacement lenses and brackets available; seek qualified service for repairs |
Frequently Asked Questions - SCB-5005 Hanwha
What type of camera is the Hanwha SCB-5005?
The Hanwha SCB-5005 is a security camera designed for fixed surveillance. It is typically a box camera used with a separate lens.
How do I connect the SCB-5005 to a DVR?
Connect the camera's composite video output (BNC connector) to a video input on the DVR. Ensure the DVR is set to the correct channel, and use a 75-ohm coaxial cable for reliable signal transmission.
What power supply does this camera require?
The SCB-5005 operates on 12V DC power. Use a regulated 12V DC adapter with sufficient current rating (typically at least 500mA). Always connect with correct polarity.
How do I clean the camera lens?
Clean the lens with a soft, dry cloth or a blower brush to remove dust. Do not use abrasive materials or chemical solvents, as they may damage the lens coating. For stubborn dirt, slightly moisten the cloth with pure water.
The image is not showing on the monitor, what should I do?
Check the following: 1) Ensure the power supply is properly connected and providing 12V DC. 2) Verify the video cable is securely attached to both the camera and monitor/DVR. 3) Remove the lens cap. 4) Confirm the sync mode is set to INTERNAL. 5) Test the camera on a known working input.
Can I use this camera outdoors?
The SCB-5005 can be used outdoors if it is installed inside a weatherproof housing with a suitable IP rating. It is not rated for direct exposure to rain or extreme environmental conditions.
What lens does the SCB-5005 accept?
This camera uses a CS mount lens. You can attach manual or auto-iris lenses with a CS-mount. For auto-iris lenses, the camera provides the necessary control connector.
How do I adjust the camera's backlight compensation?
Access the camera's setup menu via the OSD (On-Screen Display) or a rear-mounted switch. Look for a setting labeled BLC (Backlight Compensation) and set it to ON or AUTO to improve subject visibility in strong backlight conditions.
Does this camera support night vision?
No, the SCB-5005 is a color camera without built-in infrared LEDs. It requires adequate ambient lighting or an external IR illuminator to capture usable images in low-light conditions.
Where can I find spare parts or get repairs?
Spare parts such as lenses, brackets, and connectors are available from authorized Hanwha dealers. For repairs, contact a certified technician or the manufacturer's service center to avoid damaging the unit.
User questions about SCB-5005 Hanwha
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual SCB-5005 - Hanwha and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SCB-5005 by Hanwha.