Hoffman

A36X2E5410 - Wall socket Hoffman - Free user manual and instructions

Find the device manual for free A36X2E5410 Hoffman in PDF.

📄 4 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Hoffman A36X2E5410 - page 2
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Wall Socket / Electrical Outlet
Brand Hoffman
Model Number A36X2E5410
Mounting Flush mount (standard wall box)
Number of Outlets 2 (duplex)
Voltage Rating 125 V AC
Current Rating 15 A
Receptacle Configuration 5-15R (NEMA)
Terminal Connection Side wiring (screw terminals)
Material Thermoplastic faceplate, nylon body
Color White
Dimensions (H x W x D) 4.2 x 4.2 x 1.5 inches
Weight 0.4 lb
Operating Temperature -20°C to 60°C
Certifications UL Listed, CSA Certified
Maintenance Wipe with dry cloth; no liquid cleaners
Safety Features Grounding terminal, tamper-resistant shutters
Repair Replaceable faceplate and internal receptacle
Compatibility Standard junction boxes, 2-3/4 inch depth minimum

Frequently Asked Questions - A36X2E5410 Hoffman

How do I install the Hoffman A36X2E5410 wall socket?
First, cut power at the breaker and use a voltage tester. Connect the black wire to the brass screw, white to silver, and ground to green. Mount into a standard junction box and attach the faceplate.
What is the maximum electrical load for this outlet?
The outlet is rated for 15 amps at 125 volts, meaning a maximum of 1875 watts. Do not exceed this rating to avoid overheating.
Can I use this wall socket outdoors?
The socket itself is not weatherproof. If used outdoors, it must be placed in a weatherproof box with a bubble cover or be protected from moisture.
How should I clean the socket and faceplate?
Use a soft dry cloth to wipe the surface. Never spray liquids directly on the outlet, as moisture can cause a short circuit.
Does this wall socket have tamper-resistant features?
Yes, the A36X2E5410 includes tamper-resistant shutters that block foreign objects from entering the slots unless a plug is inserted correctly.
Is this outlet compatible with GFCI protection?
You can connect it downstream of a GFCI device or use a GFCI breaker to provide ground-fault protection for this outlet.
What wire gauge should I use with this 15A outlet?
Use 14 AWG copper wire for a 15-amp circuit, as required by the NEC for branch circuits.
Can I paint the faceplate to match my wall?
Painting is not recommended because it can block the tamper-resistant shutters and reduce safety. Replace with a new faceplate if color is needed.
How do I verify the wiring is correct after installation?
Plug in a receptacle tester and check the indicator lights. It will confirm if hot, neutral, and ground wires are correctly connected.
What is the warranty for this Hoffman wall socket?
Hoffman offers a limited lifetime warranty against defects in materials and workmanship. Keep your receipt and register the product for coverage.

User questions about A36X2E5410 Hoffman

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Wall socket in PDF format for free! Find your manual A36X2E5410 - Hoffman and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. A36X2E5410 by Hoffman.

USER MANUAL A36X2E5410 Hoffman

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Hoffman

Model : A36X2E5410

Category : Wall socket