Big Bang Meca-10 414.OX.4010.LR.4096.NJA18 - Wristwatch HUBLOT - Free user manual and instructions
Find the device manual for free Big Bang Meca-10 414.OX.4010.LR.4096.NJA18 HUBLOT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wristwatch |
| Brand | Hublot |
| Model | Big Bang Meca-10 414.OX.4010.LR.4096.NJA18 |
| Movement | Mechanical hand-winding calibre HUB1201 |
| Power Reserve | 10 days (approximately 240 hours) |
| Case Material | 18K King Gold (gold alloy) |
| Case Diameter | 45 mm |
| Case Thickness | 15.7 mm |
| Water Resistance | 100 metres (10 ATM) |
| Crystal | Sapphire crystal with anti-reflective coating |
| Dial | Skeleton dial with hours, minutes and power reserve indicator |
| Functions | Hours, minutes, small seconds, 10-day power reserve indicator |
| Strap | Rubber and alligator leather strap with King Gold deployant buckle |
| Crown | Screw-down crown with Hublot logo |
| Luminescence | SLN (SuperLuminova) hands and indexes |
| Jewels | 22 jewels |
| Frequency | 21,600 vibrations per hour (3 Hz) |
| Care and Cleaning | Wipe with a soft, dry cloth; avoid solvents; keep away from extreme magnetic fields; service every 3-5 years by an authorised Hublot service centre. |
| Safety | Water resistance tested; ensure the crown is screwed down before swimming; avoid operating the crown under water. |
| Spare Parts and Repairability | Genuine Hublot spare parts available via authorised service centres; comprehensive repair and servicing network. |
| General Information | Swiss made, limited edition with unique serial number, comes with a 2-year international warranty. |
Frequently Asked Questions - Big Bang Meca-10 414.OX.4010.LR.4096.NJA18 HUBLOT
How do I wind the Hublot Big Bang Meca-10?
To wind the watch, gently turn the crown clockwise in the neutral position (position 1) until you feel a slight resistance. This is a mechanical hand-winding movement, so manual winding is required. For a full 10-day power reserve, rotate the crown approximately 100 times, but you can also give it a few turns daily to keep it running.
How do I set the time on the Big Bang Meca-10?
Pull the crown out to the time-setting position (position 2) and rotate it to set the hours and minutes. We recommend setting the time with the crown pushed in and the watch running to avoid damage. After setting, press the crown back in and give it a few winds.
What is the power reserve and how do I check it?
The power reserve indicates the amount of remaining energy in the mainspring. On the skeleton dial, there is a dedicated power reserve indicator at the top. It shows the energy left in days, from 0 to 10. When the hand approaches 0, the watch should be wound.
Is the watch water-resistant and can I swim with it?
The watch has a water resistance of 100 metres (10 ATM), which means it is suitable for swimming, snorkelling, and everyday water exposure. However, avoid pressing the chronograph or crown under water, and always ensure the crown is screwed down to maintain water resistance.
How should I clean and maintain the watch?
For daily cleaning, use a soft, dry, lint-free cloth to gently wipe the case, crystal, and strap. For deeper cleaning, you can use a slightly damp cloth, then dry immediately. Avoid chemical solvents or ultrasonic cleaners. We recommend a professional service every 3-5 years by an authorised Hublot service centre.
What materials is the watch made of?
The case is made from 18K King Gold (Hublot's exclusive gold alloy), which is more resistant to scratches and oxidation than standard 18K gold. The strap is a combination of rubber and alligator leather, and the crystal is a sapphire crystal with anti-reflective coating.
How does the skeleton dial work?
The skeleton dial reveals the inner workings of the HUB1201 movement. The main plates and bridges are openworked to display gears, springs, and the 10-day power reserve mechanism. This design not only looks intricate but also reduces weight and enhances the mechanical aesthetic.
What should I do if the watch stops after being idle?
If the watch has completely stopped, it simply needs to be re-wound. Turn the crown clockwise for about 20-30 turns to restart the movement, then set the time as needed. If it continues to stop, it may require a service or repair by an authorised Hublot specialist.
Are spare parts available for the Big Bang Meca-10?
Yes, genuine Hublot spare parts are available through authorised service centres. The watch's modular construction allows for replacement of individual components like the crown, strap, or crystal. For any repair, contact an authorised dealer or Hublot boutique to ensure original parts and qualified technicians.
How do I adjust the strap of the Big Bang Meca-10?
The strap can be adjusted using the deployant buckle. To shorten the rubber strap, open the buckle and slide the adjustment hole to a smaller setting. For the alligator leather portion, a watchmaker or authorised Hublot boutique can adjust it. Ensure the strap fits snugly but comfortably, allowing a finger's width between the strap and your wrist.
User questions about Big Bang Meca-10 414.OX.4010.LR.4096.NJA18 HUBLOT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Wristwatch in PDF format for free! Find your manual Big Bang Meca-10 414.OX.4010.LR.4096.NJA18 - HUBLOT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Big Bang Meca-10 414.OX.4010.LR.4096.NJA18 by HUBLOT.
USER MANUAL Big Bang Meca-10 414.OX.4010.LR.4096.NJA18 HUBLOT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HUBLOT
Model : Big Bang Meca-10 414.OX.4010.LR.4096.NJA18
Category : Wristwatch