Hawk-300T - Wristwatch Nite - Free user manual and instructions

Product Type	Wristwatch
Brand	Nite
Model	Hawk-300T
Case Diameter	42 mm
Case Thickness	12 mm
Strap Width	22 mm
Weight	150 g
Power Source	Quartz battery (SR626SW)
Display Type	Analog with date window
Water Resistance	100 meters (330 feet)
Chronograph	Yes, 1/10 second accuracy
Date Function	Perpetual calendar
Case Material	Stainless steel
Crystal Type	Sapphire-coated mineral glass
Strap Material	Leather or silicone (optional)
Clasp Type	Deployant clasp
Movement Type	Japanese quartz
Battery Life	Up to 3 years
Cleaning	Wipe with soft dry cloth; avoid solvents
Water Maintenance	Rinse with fresh water after saltwater exposure
Servicing Interval	Recommended every 3-5 years
Spare Parts	Battery, strap, crown, and crystal available
Repairability	Modular design for easy component replacement
Operating Temperature	-10°C to +50°C

Frequently Asked Questions - Hawk-300T Nite

How do I set the time on my Nite Hawk-300T watch?

Pull the crown to position 2, turn it to adjust the time. For the date, pull to position 1 and turn clockwise. After setting, push the crown back in completely to ensure water resistance.

What type of battery does the Hawk-300T use and how long does it last?

The watch uses a SR626SW silver-oxide battery, which typically lasts 3 years under normal use. A low-battery indicator may cause the second hand to move in 4-second increments.

Is the Nite Hawk-300T suitable for swimming?

Yes, with a 100-meter water resistance rating, it is suitable for swimming and snorkeling, but not for deep diving. Always ensure the crown is pushed in or screwed down before water exposure.

How do I use the chronograph function?

Press the top pusher to start or stop the chronograph, and the bottom pusher to reset. The subdials track 1/10 seconds, minutes, and hours. Avoid pressing the reset while the chronograph is running.

Can I replace the strap on my Hawk-300T?

Yes, the strap uses a standard 22 mm lug width. You can easily remove the strap with a spring bar tool and replace it with any compatible 22 mm strap from third-party brands.

How should I clean and maintain my watch?

Wipe the case and crystal with a soft lint-free cloth regularly. For deeper cleaning, use a slightly damp cloth with mild soap, then dry immediately. Avoid harsh chemicals, ultrasonic cleaners, and steam cleaning.

What should I do if my watch stops running?

First, check if the crown is fully pushed in. If still stopped, the battery may be dead. Replace the SR626SW battery, or take it to a professional to avoid damaging the movement.

How do I adjust the date on the watch?

Pull the crown to position 1 and turn it clockwise to set the date. Do not change the date between 9 PM and 3 AM, as the date mechanism is engaged then and could be damaged.

Is the crystal scratch-resistant?

The Hawk-300T features a sapphire-coated mineral crystal, which provides excellent scratch resistance for everyday wear. However, avoid contact with diamond or other hard objects to prevent damage.

How often should the watch be serviced?

A general service, including cleaning and oiling of the movement, is recommended every 3 to 5 years to maintain accuracy and extend the life of the watch. Battery replacement can be done in between as needed.

USER MANUAL Hawk-300T Nite

Hawk Series Handbook

Technical Specifications
GTLS RATING	T25 or T100
CASE FINISH	Black polycarbonate
STRAP TYPE	Polymer or stainless steel bracelet
CRYSTAL	Sapphire with triple anti-reflective coating
MOVEMENT TYPE	Quartz
MOVEMENT	Swiss made Ronda 715Li
CROWN TYPE	Push
DIAL DIAMETER	33mm
CASE DIAMETER	51mm
CASE DEPTH	14.6mm
LUG WIDTH	24mm
FIXING TYPE	2 x 24mm spring bars(https://www.nitewatches.com/store/gb/screws-pins/pack-of-two-24mm-spring-bars/)
WEIGHT	70g Fitted on polymer strap162g Fitted on steel bracelet
WATER RESISTANCE	200m
BATTERY LIFE	10 Years

Setting the time and date

Pos. I Position of rest (watch running)

Pos. II Quick-change correction for date

Blocking time for the quick-change day correction is from approx. 9.30 pm and midnight.

– Pull the crown out to position II (watch still running).
- Turn the crown until the current date appears.
- Push the crown back into position I.

Pos. III Setting the time

– Pull the crown out to position III (watch stopped).
- Turn the crown, until the current time is displayed
(remember the 24-hour cycle).
- Push the crown back into position I.

Strap fitting/options

The Hawk models can be fitted with a polymer strap, one-piece 24mm webbing or a stainless-steel bracelet.

With a 24mm lug width and 24mm spring bar fixing, straps are easily interchangeable using a forked spring bar tool. Many 24mm aftermarket straps are also compatible*

The Hawk straps exclusively available through nitewatches.com can be found here:

https://www.nitewatches.com/store/gb/straps/hawk

The stainless-steel bracelet can be adjusted in length by adding or removing links and by also using the 3-micro adjustment on the buckle part of the strap.

*Nite Watches accept no responsibility with the sizing and fitting of any aftermarket straps.

If you have any questions about the Hawk series then please email us on [e-mail].