EGLO

Nabao - Lighting EGLO - Free user manual and instructions

Find the device manual for free Nabao EGLO in PDF.

📄 1 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice EGLO Nabao - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Type de produit Pendant lighting
Brand EGLO
Model Nabao
Mounting type Ceiling mounted
Material Steel and glass
Finish White opal glass shade, nickel canopy
Dimensions Diameter 40 cm, height 25 cm (shade only)
Cable length Adjustable up to 150 cm
Weight 1.5 kg
Power supply 220-240 V, 50/60 Hz
Light source E27 bulb (not included)
Number of bulbs 1
Max bulb wattage 60 W
Dimmable Yes, depending on bulb type
Protection class Class I
IP rating IP20 (indoor only)
Installation Hardwired, includes mounting hardware
Maintenance Clean with dry cloth; disconnect power first
Spare parts Available via EGLO service; bulbs replaceable
Warranty 2 years

Frequently Asked Questions - Nabao EGLO

What type of bulb does the EGLO Nabao use?
The Nabao requires an E27 screw bulb with a maximum wattage of 60 W. The bulb is not included in the package.
Is the EGLO Nabao dimmable?
Dimmability depends on the bulb used. With a compatible dimmable LED bulb, the fixture will dim smoothly.
Can I install the Nabao myself?
Yes, if you have basic electrical knowledge. The fixture is ceiling mounted and includes mounting hardware. For safety, always switch off the power before installation.
What is the recommended mounting height?
The cable is adjustable up to 150 cm. For typical ceilings, mount the shade so it hangs at least 2.2 m above the floor to avoid contact.
How do I clean the EGLO Nabao?
Use a soft dry cloth to wipe the shade and canopy. Do not use water or abrasive cleaners. Always disconnect power before cleaning.
Is the Nabao suitable for outdoor use?
No, this fixture is rated IP20 and is intended for indoor areas only. It should not be exposed to moisture or rain.
What is the maximum ceiling thickness for installation?
The included screws and anchors are designed for standard drywall or plaster ceilings, up to 15 mm thick. For thicker or concrete ceilings, use appropriate wall plugs.
Can I replace the bulb with an LED one?
Yes, the E27 socket is compatible with LED, CFL, and incandescent bulbs. We recommend an LED bulb for lower energy consumption.
What should I do if the light flickers after installation?
Check that the bulb is securely screwed in and that all wiring connections are tight. Flickering may also be caused by an incompatible dimmer or a faulty bulb.
Are spare parts available for the Nabao?
Yes, you can order replacement parts such as a new shade or canopy from EGLO's official service. The bulb is easily replaceable in any way.

User questions about Nabao EGLO

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Lighting in PDF format for free! Find your manual Nabao - EGLO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Nabao by EGLO.

USER MANUAL Nabao EGLO

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : EGLO

Model : Nabao

Category : Lighting