CCU-100P - Contrôleur à distance DataVideo - Free user manual and instructions
Find the device manual for free CCU-100P DataVideo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Remote Camera Control Unit |
| Brand | DataVideo |
| Model | CCU-100P |
| Dimensions | 482 x 44 x 200 mm (19-inch rack mount) |
| Weight | 2.5 kg (5.5 lb) |
| Power Supply | 12V DC, 1.5A via included AC adapter |
| Control Interface | RS-232, RS-422, and Ethernet |
| Camera Control | Pan, Tilt, Zoom, Focus, Iris |
| White Balance | Auto and manual presets |
| Gain Control | Adjustable from -3 dB to +18 dB |
| Shutter Speed | Adjustable from 1/60 to 1/10000 s |
| Color Temperature | Adjustable 2800K to 7500K |
| LCD Display | Backlit status and menu display |
| Mounting | 19-inch rack mountable with included ears |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 20% to 80% non-condensing |
| Cleaning | Wipe with a soft, dry cloth only |
| Safety | Do not expose to rain or moisture |
| Reparability | Contact authorized DataVideo service center |
| Included Accessories | AC adapter, user manual, rack mount ears |
Frequently Asked Questions - CCU-100P DataVideo
How do I connect the CCU-100P to my camera?
The CCU-100P offers multiple interfaces including RS-232, RS-422, and Ethernet. Select the appropriate cable for your camera and connect it to the corresponding port on the rear panel. For long distances, use RS-422 or Ethernet with a suitable converter.
What is the maximum cable length for RS-422?
The RS-422 interface supports cables up to 1200 meters (4000 feet) when using twisted-pair wiring. For best results, use shielded twisted-pair cable with proper termination.
Can I control pan and tilt with this unit?
Yes, the CCU-100P features a joystick and control buttons for pan and tilt operations with compatible PTZ cameras. Set the camera to remote mode and assign the correct address.
How do I adjust the white balance?
Use the menu on the LCD display to select White Balance mode. You can choose Auto or manually set preset values such as 3200K, 5600K, or custom color temperature.
Does the CCU-100P support firmware updates?
Yes, firmware updates are available through the Ethernet connection. Download the latest firmware from the DataVideo website and use the update utility to upload it to the unit.
What power supply is required?
The unit operates on 12V DC and comes with an AC adapter that supports 100-240V AC input. Ensure the adapter is properly connected before powering on.
How do I clean the CCU-100P?
Always disconnect power before cleaning. Use a soft, dry cloth to wipe the surface and display. Do not use abrasive cleaners or solvents that may damage the finish.
Is the device rack mountable?
Yes, the CCU-100P is designed for 19-inch rack mounting. The included rack ears allow installation in a standard equipment rack, requiring 1U of space.
What are the default communication settings for RS-232?
The default baud rate is 9600 bps with 8 data bits, no parity, and 1 stop bit. These settings can be changed in the communication setup menu.
My camera does not respond to the controller. What should I do?
Verify that all cables are securely connected and the correct interface is selected. Check the camera's address matches the controller's setting. Ensure power is supplied to both units and try the reset function.
User questions about CCU-100P DataVideo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Contrôleur à distance in PDF format for free! Find your manual CCU-100P - DataVideo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CCU-100P by DataVideo.