5817XT - Home Automation HONEYWELL - Free user manual and instructions
Find the device manual for free 5817XT HONEYWELL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Door/Window Contact Sensor |
| Brand | Honeywell |
| Model | 5817XT |
| Category | Home Automation |
| Compatibility | Honeywell security panels and home automation systems |
| Operating Frequency | 868 MHz (EU) or 433 MHz (US) depending on region |
| Dimensions | Approximately 72 x 39 x 17 mm |
| Weight | Approximately 30 g (including battery) |
| Power Source | 1 x 3V CR2032 lithium coin cell battery |
| Battery Life | Up to 5 years under normal usage |
| Mounting Type | Surface mounted with adhesive tape or screws |
| Reed Switch | Built-in magnetic reed switch for open/close detection |
| Tamper Switch | Includes anti-tamper protection against removal |
| Signal Range | Up to 300 ft (90 m) open field to the panel |
| Supervision | Periodic supervision check-in signals |
| Operating Temperature | 0°C to 49°C (32°F to 120°F) |
| Humidity Range | Up to 85% non-condensing |
| Low Battery Detection | Transmits low battery signal to the control panel |
| Functionality | Detects opening/closing of doors, windows, and similar contacts |
| Maintenance | Clean with a dry cloth; replace battery when low battery indicator is triggered |
| Safety | For indoor use only; keep away from extreme heat and humidity |
| Spare Parts | CR2032 battery commonly available; sensor unit is sealed and non-repairable |
| Repair | If faulty, contact your authorized Honeywell dealer |
| Certifications | Complies with relevant CE and FCC regulations |
| Package Contents | Sensor unit, magnet, mounting hardware, instruction sheet |
Frequently Asked Questions - 5817XT HONEYWELL
How do I install the Honeywell 5817XT sensor?
To install the 5817XT, first decide on a mounting location for the sensor on the fixed frame and the magnet on the moving part (door/window). Keep the gap between sensor and magnet less than 2 inches. Use the provided screws or adhesive tape to attach both parts. Ensure the alignment marks are matched, then enroll the sensor to your control panel.
What battery does the 5817XT use and how do I replace it?
The 5817XT uses a CR2032 3V lithium coin cell battery. To replace it, slide open the battery compartment cover on the back of the sensor, remove the old battery, insert the new one with the + sign facing up, and close the cover securely.
Can the 5817XT be used with my Honeywell alarm system?
Yes, the 5817XT is compatible with many Honeywell security panels and home automation systems that support wireless sensors, such as the Honeywell Lyric, Vista series, and others. Check your panel's compatibility before purchase.
What is the wireless range of the 5817XT?
The wireless range is up to 300 feet (90 meters) in an open field. Walls, metal objects, and interference can reduce this range. For best performance, place the sensor within range of the panel and avoid mounting near large metal obstructions.
How do I enroll the 5817XT to my control panel?
Put your control panel into programming mode. Enter the sensor's 7-digit serial number (found on the back) and select the zone type (e.g., entry/exit or interior). Then activate the sensor to verify signal strength. Refer to your panel's manual for exact steps.
Does the 5817XT have tamper protection?
Yes, the 5817XT includes a built-in tamper switch. If the sensor is removed from its mounting surface, the tamper switch is triggered and sends a tamper alert to the control panel, enhancing security.
How do I know if the battery is low?
When the battery is low, the 5817XT sends a low battery signal to the control panel, which will display a low battery warning. Some panels may also emit a periodic beep from the sensor itself. Replace the battery promptly to avoid losing protection.
Can I use the 5817XT for gates or windows?
Absolutely. The 5817XT is a versatile contact sensor designed to detect opening or closing of any compatible surface, including doors, windows, gates, garage doors, and even cabinets or safes.
What if the sensor and magnet are misaligned?
For reliable operation, keep the sensor and magnet aligned and within 2 inches of each other. If they are misaligned, the sensor may not detect the open/close state correctly. Adjust the mounting position until the gap and alignment are optimal.
Is the 5817XT waterproof?
No, the 5817XT is not waterproof. It is designed for indoor use only. Do not expose it to rain, excessive moisture, or temperatures outside the operating range of 0°C to 49°C (32°F to 120°F).
User questions about 5817XT HONEYWELL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Home Automation in PDF format for free! Find your manual 5817XT - HONEYWELL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 5817XT by HONEYWELL.
USER MANUAL 5817XT HONEYWELL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HONEYWELL
Model : 5817XT
Category : Home Automation