IMG-120T - Uncategorized Planet - Free user manual and instructions
Find the device manual for free IMG-120T Planet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Industrial Media Converter |
| Model | Planet IMG-120T |
| Dimensions | 140 x 100 x 32 mm |
| Weight | 0.5 kg |
| Power Supply | 12-48V DC terminal block or 5V USB, dual input |
| Power Consumption | 5 Watts (max) |
| Copper Port | 1 x 10/100/1000BASE-T RJ-45, Auto-MDI/MDIX |
| Fiber Port | 1 x 100/1000BASE-X SFP slot |
| Data Rate | 10/100/1000 Mbps (copper), 100/1000 Mbps (fiber) |
| Standards | IEEE 802.3, 802.3u, 802.3ab, 802.3z |
| Operating Temperature | -40°C to 75°C |
| Storage Temperature | -40°C to 85°C |
| Humidity | 5% to 95% (non-condensing) |
| Enclosure | Industrial metal housing, IP30, wall-mountable |
| LED Indicators | Power, Link/Activity (copper), Fiber Link/Activity, SFP |
| Installation Method | DIN-rail or wall mount |
| Safety | CE, FCC, UL (pending), surge protection |
| Warranty | 3-year limited warranty |
| Reparability | Modular SFP and field-replaceable terminal block |
| Maintenance | Clean with dry cloth; avoid solvents |
Frequently Asked Questions - IMG-120T Planet
What is the Planet IMG-120T used for?
The Planet IMG-120T is an industrial media converter that extends Ethernet networks over fiber optic cables, ideal for harsh environments.
How do I connect the copper and fiber ports?
Connect a copper Ethernet cable to the RJ-45 port and a compatible SFP module into the SFP slot. The device auto-negotiates speed and duplex.
What SFP modules are supported?
The IMG-120T supports standard 100BASE-FX and 1000BASE-X SFP modules, both multimode and single-mode.
Can the device be powered by PoE?
No, PoE is not supported. Use a 12-48V DC power source connected to the terminal block or a 5V USB power adapter.
What is the maximum distance for fiber transmission?
With a single-mode SFP module, the distance can reach up to 120 km. Multimode SFP supports up to 550 m depending on the module.
How do I install the device on a DIN rail?
Attach the included DIN-rail clip to the back of the unit, then snap it onto a standard 35mm DIN rail.
What do the LED indicators mean?
The PWR LED shows power. Link/ACT LEDs indicate link status and activity on copper and fiber ports. Refer to the manual for detailed states.
Is the device suitable for outdoor installations?
Yes, the metal housing has an IP30 rating and operates at temperatures from -40°C to 75°C, but it must be installed in a protected enclosure.
Can the IMG-120T be used as a switch?
No, it is a media converter with only two ports (one copper, one fiber). For switching you would need a separate switch.
How do I clean and maintain the device?
Disconnect power, wipe the exterior with a dry soft cloth. Avoid liquids and abrasives. Check the SFP port for dust periodically.
User questions about IMG-120T Planet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual IMG-120T - Planet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IMG-120T by Planet.
USER MANUAL IMG-120T Planet
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Planet
Model : IMG-120T
Category : Uncategorized