Cilindro Wall - Range hood Foster - Free user manual and instructions
Find the device manual for free Cilindro Wall Foster in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wall-mounted range hood |
| Brand | Foster |
| Model | Cilindro Wall |
| Mounting Type | Wall-mounted |
| Width | 900 mm |
| Height | Adjustable from 500 to 750 mm |
| Depth | 450 mm |
| Net Weight | 15 kg |
| Power Supply | 220-240 V, 50 Hz |
| Motor Power | 180 W |
| Maximum Extraction Rate | 650 m³/h |
| Number of Speeds | 3 speeds plus boost |
| Noise Level | 45-65 dB(A) depending on speed |
| Lighting | Integrated LED spotlights |
| Control Type | Electronic touch control |
| Grease Filter | Washable aluminum mesh filter |
| Ducting Diameter | 150 mm |
| Air Discharge | Ducted or recirculating mode (with optional carbon filter) |
| Energy Efficiency Class | A |
| Safety Features | Thermal overload protection, anti-return valve |
| Maintenance | Regular cleaning of filters and surfaces |
| Installation | Professional installation recommended |
| Included Accessories | Installation kit, user manual |
| Warranty | 2 years manufacturer warranty |
| Country of Origin | Italy |
Frequently Asked Questions - Cilindro Wall Foster
What is the installation height for the Foster Cilindro Wall range hood?
The recommended installation height is between 65 and 75 cm above an electric cooktop and between 75 and 85 cm above a gas cooktop. Always follow the safety instructions in the manual.
How do I clean the grease filter?
The aluminum grease filter can be removed and washed in a dishwasher or by hand with warm soapy water. Allow it to dry completely before reattaching. Clean the filter at least once a month or more often with heavy use.
Can I use the hood in recirculating mode without an external duct?
Yes, the Cilindro Wall can be used in recirculating mode if you install an optional carbon filter. This is ideal for installations where ducting to the outside is not possible. The carbon filter must be replaced periodically.
How do I replace the LED lights?
The hood uses integrated LED spotlights. If they fail, you should contact Foster technical support or a qualified electrician for replacement to avoid damaging the unit.
What is the maximum extraction rate?
The maximum extraction rate is 650 m³/h, which is suitable for kitchens up to about 40 square meters with average cooking activity.
Does the hood have a remote control?
No, the Cilindro Wall is controlled via electronic touch buttons on the front of the unit. Some models may have a remote, but this specific manual does not mention one.
How do I reset the filter saturation indicator?
After cleaning or replacing the filters, press and hold the filter reset button (if available) for a few seconds until the indicator light turns off. Refer to the manual for exact steps.
Can the ducting be routed horizontally?
Yes, the exhaust duct can be routed horizontally or vertically, but it should have a slight upward slope to prevent condensation. The duct diameter must be 150 mm to minimize noise and maximize airflow.
Is the hood suitable for island installation?
No, the Cilindro Wall is a wall-mounted model. For island installation, you would need a ceiling-mounted or pendant type range hood.
What should I do if the motor does not start?
Check if the power cord is plugged in and the circuit breaker is correct. Also ensure that the hood is not in standby mode. If the problem persists, contact customer service for troubleshooting.
User questions about Cilindro Wall Foster
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual Cilindro Wall - Foster and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Cilindro Wall by Foster.