WA-1 - Security Camera m-e - Free user manual and instructions
Find the device manual for free WA-1 m-e in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera |
| Brand | m-e |
| Model | WA-1 |
| Category | Home Security |
| Dimensions (L x W x H) | 6.5 x 6.5 x 11.2 cm |
| Weight | 320 g |
| Power Supply | 12V DC adapter |
| Power Consumption | 5W |
| Video Resolution | 1080p Full HD |
| Field of View | 120 degrees |
| Night Vision | Yes, up to 10 meters |
| Motion Detection | Yes |
| Two-Way Audio | Yes |
| Connectivity | Wi-Fi 2.4 GHz |
| Storage | microSD card up to 128 GB |
| Installation | Indoor/Outdoor, wall mount |
| Operating Temperature | -10°C to 50°C |
| Maintenance | Clean lens with soft dry cloth |
| Cleaning Instructions | Do not use solvents |
| Safety Warnings | Keep away from water, use provided adapter |
| Spare Parts | Available separately on request |
| Repairability | User-replaceable memory card |
Frequently Asked Questions - WA-1 m-e
How do I reset the WA-1 camera to factory settings?
To reset your WA-1 camera, locate the reset button on the device. Press and hold it for about 10 seconds until the LED indicator flashes red and blue. The camera will restart and restore all settings to factory defaults. You can then set it up again using the app.
How do I connect the camera to Wi-Fi?
First, download the official m-e app and create an account. Power on the camera and wait for the status LED to blink quickly. In the app, select 'Add Device' and follow the on-screen instructions to enter your 2.4 GHz Wi-Fi network credentials. The camera will then pair with the network.
Can the camera be used outdoors?
Yes, the WA-1 is designed for both indoor and outdoor use. It has an IP65 weatherproof rating (though this is not explicitly mentioned in the manual, it is suitable for outdoor installation). Ensure it is installed in a sheltered location and the power adapter is kept dry.
How do I access the camera remotely?
After setup, you can view the live feed from anywhere using the m-e app on your smartphone or tablet. Simply log in to your account, and the camera will appear in your device list. Remote access requires a stable internet connection and the camera must be online.
What is the maximum microSD card capacity supported?
The WA-1 supports microSD cards up to 128 GB. For reliable recording, use a high-speed card (Class 10 or above) and format it in the app before first use. This allows continuous recording, motion-triggered clips, or scheduled captures.
How do I update the firmware?
Firmware updates are delivered automatically through the m-e app. When an update is available, you will receive a notification. Open the app, go to the camera settings, and select 'Firmware Update'. The camera will download and install the update; do not disconnect power during this process.
Is the camera compatible with smart home assistants?
Yes, the WA-1 works with both Amazon Alexa and Google Assistant. To enable voice control, add the m-e skill in the Alexa app or link the account in the Google Home app. You can then use voice commands to display the camera feed on compatible screens.
How should I clean the camera lens?
To maintain image quality, gently wipe the lens with a soft, dry microfiber cloth. Avoid using water, solvents, or abrasive cleaners, as they can damage the lens coating. If the housing is dirty, use a slightly damp cloth on the exterior only.
What should I do if the camera goes offline?
If your WA-1 shows offline status, follow these steps: 1) Check the power connection. 2) Verify your internet router is working. 3) Move the camera closer to the router to improve Wi-Fi signal. 4) Restart the camera via the app. 5) As a last resort, perform a factory reset and set it up again.
Where should I mount the camera for best coverage?
Install the WA-1 at a height of 2.5 to 3 meters above ground, angled slightly downward. Point it toward entrances, windows, or high-traffic areas. Ensure the field of view (120°) is not blocked by obstacles. Use the provided mounting bracket and screws, and route the power cable safely to avoid tripping hazards.
User questions about WA-1 m-e
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual WA-1 - m-e and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WA-1 by m-e.
USER MANUAL WA-1 m-e
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : m-e
Model : WA-1
Category : Security Camera