VA203I - Dishwasher Atag - Free user manual and instructions
Find the device manual for free VA203I Atag in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dishwasher |
| Brand | Atag |
| Model | VA203I |
| Energy Efficiency Class | A+ |
| Number of Place Settings | 12 |
| Number of Programs | 5 |
| Noise Level | 49 dB(A) |
| Water Consumption per Cycle | 12 L |
| Annual Energy Consumption | 290 kWh |
| Dimensions (H x W x D) | 81.5 cm x 59.8 cm x 55.5 cm |
| Installation Type | Built-in |
| Control Type | Electronic |
| Display | Digital |
| Delay Start | 1 to 24 hours |
| AquaStop | Yes |
| Drying System | Heat Exchanger |
| Programs | Eco, Intensive, Delicate, Quick, Rinse |
| Salt Indicator | Yes |
| Rinse Aid Indicator | Yes |
| Self-Cleaning Filter | Yes |
| Remaining Time Display | Yes |
Frequently Asked Questions - VA203I Atag
How do I install the VA203I dishwasher correctly?
Ensure the height of your cabinet is at least 81.5 cm and the depth is 55.5 cm. Connect the appliance to a cold water supply with a pressure of 0.03-0.6 MPa. Use the supplied hose and secure all connections to avoid leaks. Level the appliance using the adjustable feet to ensure stable operation.
How do I start a wash cycle?
Load the dishes, add detergent and rinse aid. Press the Power button, select a program using the program selector, then press Start. The digital display will show the remaining time.
How does the delay start function work?
Use the Delay Start button to postpone the beginning of the cycle. You can set a delay between 1 and 24 hours. Press the button repeatedly to increase the delay, then start the cycle; the dishwasher will begin automatically after the selected time.
How often should I clean the filters?
Clean the filters at least once a month. Rotate the filter assembly counterclockwise and lift it out. Rinse under running water with a soft brush. Replace it by aligning and turning clockwise until it stops. This prevents clogging and ensures efficient washing.
Why are my dishes not drying properly?
Check if the rinse aid is filled. Low rinse aid can cause poor drying. Also, choose the Eco or Intensive program which includes a drying phase. Ensure that plastic items are not placed in the lower rack where heat is higher, and open the door slightly after the cycle to allow moisture to escape.
What should I do when the salt indicator lights up?
The salt indicator indicates low water softener salt. Open the salt container on the bottom of the tub, fill it with dishwasher salt and run a rinse cycle. Never use table salt as it may damage the water softener.
How can I save water and energy while using the dishwasher?
Wait until the dishwasher is fully loaded before starting a cycle. Use the Eco program for normally soiled dishes; it uses less water and energy. Choose the energy-saving options and avoid pre-rinsing dishes under running water.
How do I clean the spray arms?
Remove the lower and upper spray arms by unscrewing the nut and pulling them down. Rinse the nozzles under water and use a needle to remove any food particles. Clean at least every 2-3 months to maintain spray pressure.
What types of detergent are suitable for the VA203I?
Use detergent specifically for dishwashers, in tablets, powder, or gel form. Place the detergent in the dispenser completely before starting the cycle. For quick cycles, a liquid or tablet may be more suitable to ensure complete dissolving.
How do I cancel or change a running program?
Press and hold the Start button for about 3 seconds to cancel the current program. The water will drain for about a minute. Then you can select a new program and start again. Always unload in a safe way after cancellation.
User questions about VA203I Atag
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual VA203I - Atag and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VA203I by Atag.
USER MANUAL VA203I Atag
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Atag
Model : VA203I
Category : Dishwasher