RocketRAID 2522 - Controller Highpoint - Free user manual and instructions
Find the device manual for free RocketRAID 2522 Highpoint in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | RAID Controller |
| Brand | HighPoint |
| Model | RocketRAID 2522 |
| Interface | PCI Express 2.0 x4 |
| Internal Ports | 2 x SATA 6Gb/s |
| External Ports | 2 x eSATA 6Gb/s |
| Supported Drives | SATA I/II/III (HDD & SSD) |
| RAID Levels | RAID 0, 1, 10, JBOD |
| Data Transfer Rate | Up to 6Gb/s per port |
| Form Factor | Full-height and low-profile bracket included |
| Dimensions | Approx. 14.5 cm x 6.8 cm (card) |
| Weight | Approx. 150 g |
| Power Consumption | 10 W (max) |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Operating Humidity | 10% to 90% (non-condensing) |
| Supported OS | Windows, Linux, macOS (driver availability may vary) |
| RAID Management | Web-based RAID management software |
| Cooling | Passive heatsink |
| Regulatory Approvals | CE, FCC, RoHS |
| Maintenance | No moving parts; minimal maintenance required |
| Package Contents | Controller card, low-profile bracket, driver CD, quick install guide |
Frequently Asked Questions - RocketRAID 2522 Highpoint
What RAID levels does the RocketRAID 2522 support?
The RocketRAID 2522 supports RAID 0, RAID 1, RAID 10, and JBOD, providing flexibility for performance, redundancy, or combining drives.
Can I use drives of different capacities with this controller?
Yes, in RAID 1 or RAID 10 the array uses the capacity of the smallest drive. Mixing sizes is possible but not optimal for large arrays. For RAID 0 all drives are used to their full capacity.
Does it support SSDs?
Yes, the controller supports SATA-based SSDs as well as HDDs, taking advantage of the 6Gb/s interface speed for fast read/write performance.
What operating systems are compatible?
The RocketRAID 2522 offers drivers for Windows, Linux, and macOS. Always check the HighPoint website for the latest driver versions and compatibility notes.
How do I install the driver?
Insert the driver CD after connecting the card, or download the latest driver from the HighPoint support site. Run the installer and follow the on-screen instructions; a reboot may be required.
Can I boot my system from a RAID array?
Yes, the controller supports bootable RAID arrays. You may need to configure the array in the controller's BIOS utility before installing the OS on it.
How do I monitor the RAID status?
Use the Web-based RAID management software included with the controller. It provides real-time disk and array status, alerts, and event logs.
Does the controller support hot-swap?
Yes, the RocketRAID 2522 supports hot-swapping on its external eSATA ports and on internal ports when the motherboard/backplane supports it. Safely disconnect drives before removal.
What is the maximum number of drives supported?
The controller has 4 ports total (2 internal + 2 external) and supports up to 4 drives directly attached.
What should I do if a drive in a mirrored array fails?
Replace the failed drive with a new one of at least the same size. The controller will automatically start a rebuild and restore redundancy once the new drive is detected.
User questions about RocketRAID 2522 Highpoint
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Controller in PDF format for free! Find your manual RocketRAID 2522 - Highpoint and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RocketRAID 2522 by Highpoint.
USER MANUAL RocketRAID 2522 Highpoint
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Highpoint
Model : RocketRAID 2522
Category : Controller