DS-2CD2T26G1-2I - Security Camera Hikvision - Free user manual and instructions
Find the device manual for free DS-2CD2T26G1-2I Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Security Camera (Bullet) |
| Brand | Hikvision |
| Model | DS-2CD2T26G1-2I |
| Resolution | 2 MP (1920 × 1080) |
| Image Sensor | 1/2.7" Progressive Scan CMOS |
| Lens | 2.8 mm / 4 mm fixed lens (optional) |
| IR Range | Up to 30 meters |
| Housing Protection | IP67 weatherproof, vandal resistant |
| Power Supply | 12 V DC ± 25% or PoE (802.3af) |
| Power Consumption | Maximum 6.5 W |
| Dimensions | 186.6 mm × 89.9 mm × 76.8 mm |
| Weight | Approximately 700 g |
| Operating Temperature | -30 °C to +60 °C |
| Humidity | 95% or less (non-condensing) |
| Video Compression | H.265+, H.265, H.264+, H.264 |
| Smart Features | Motion detection, tamper alarm, tri-stream |
| Audio Support | Built-in microphone and speaker, two-way audio |
| Storage | microSD slot up to 256 GB |
| Network Protocols | TCP/IP, UDP, HTTP, HTTPS, ONVIF (S/G/Q), RTSP |
| Security Features | Password protection, IP address filter, HTTPS encryption |
| Maintenance and Cleaning | Clean the lens with a soft dry cloth; avoid water and solvents |
| Spare Parts and Repairability | Replacement lens, IR board, main PCB, housing; certified service center |
| Included Accessories | Mounting bracket, screw kit, waterproof connectors, quick start guide |
Frequently Asked Questions - DS-2CD2T26G1-2I Hikvision
How do I reset the Hikvision DS-2CD2T26G1-2I to factory settings?
Press and hold the reset button on the device for about 10 seconds using a pin or paperclip. The camera will reboot with default settings. Alternatively, you can reset it via the web interface under Maintenance > Factory Defaults. A factory reset restores the IP address to 192.168.1.64 and removes all user passwords.
What is the ideal mounting height for this camera?
Recommended height is 2.5 to 3 meters. This provides a good overhead view while keeping IR reflection to a minimum. Ensure the IR range of 30 meters is not obstructed by walls or foliage.
Can I use a microSD card with this camera?
Yes, the camera supports microSD cards up to 256 GB for local storage. Insert the card into the slot behind the rubber cover. You can enable recording via the web interface under Storage > SD Card.
How do I connect the camera to my network?
Connect an Ethernet cable to the camera's RJ45 port and the other end to a PoE switch or injector. If you have a non-PoE router, use a 12 V DC power adapter. The camera will automatically obtain an IP address via DHCP. Use the Hikvision SADP tool to find the device's IP address.
Does the camera support audio?
Yes, the DS-2CD2T26G1-2I has a built-in microphone and speaker. Audio input/output is supported via the integrated mic and external speaker through the terminal block. Enable audio in the web interface under Configuration > Audio.
What is the difference between H.264 and H.265+ compression?
H.265+ is an improved compression standard that reduces bitrate and storage consumption by up to 50% compared to H.264, while maintaining image quality. This camera supports both, and you can switch in the video settings.
How do I set up motion detection alerts?
Log in to the camera's web interface, go to Configuration > Event > Basic Event > Motion Detection. Enable motion detection, draw the detection area, and set the sensitivity. You can also configure arming schedules and notification methods like email alerts or FTP upload.
What is the maximum power consumption?
The camera consumes up to 6.5 W with IR LEDs active. When powered via PoE, ensure the switch provides at least 802.3af class 3 power.
Is this camera suitable for outdoor use?
Yes, it has an IP67 weatherproof housing that protects against dust and water jets. The operating temperature range is -30 °C to +60 °C, making it suitable for extreme climates.
How can I improve night vision quality?
Keep the lens clean and avoid placing the camera near reflective surfaces. The built-in IR LEDs provide up to 30 meters range. For better performance in complete darkness, you can also adjust the IR settings in the camera's Day/Night Mode to 'Auto' or 'Smart'.
User questions about DS-2CD2T26G1-2I Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual DS-2CD2T26G1-2I - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-2CD2T26G1-2I by Hikvision.
USER MANUAL DS-2CD2T26G1-2I Hikvision
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hikvision
Model : DS-2CD2T26G1-2I
Category : Security Camera