P-9060DH - Receiver TOA - Free user manual and instructions
Find the device manual for free P-9060DH TOA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Professional Digital FM/AM Receiver |
| Brand | TOA |
| Model | P-9060DH |
| Tuning Range (FM) | 87.5 – 108 MHz |
| Tuning Range (AM) | 530 – 1710 kHz |
| Tuning Method | Digital PLL synthesized tuning |
| Preset Stations | 30 station presets (FM and AM) |
| Frequency Response | 30 Hz – 15 kHz (±3 dB) |
| Signal-to-Noise Ratio | Greater than 70 dB (FM stereo) |
| Total Harmonic Distortion | Less than 0.3% |
| Audio Output | Unbalanced line output, 0.5 Vrms |
| Antenna Inputs | 75 Ω coaxial FM terminal, loop antenna for AM |
| Power Supply | AC 120 V or 230 V, 50/60 Hz (depending on version) |
| Power Consumption | 12 W |
| Dimensions (W x H x D) | 482 mm × 44 mm × 200 mm |
| Weight | 2.2 kg |
| Mounting | 19-inch rack mount, 1U height |
| Remote Control | IR remote with range of 7 m |
| Display | Digital LED frequency display |
| Operating Temperature | 0 °C to 40 °C |
| Cleaning | Use a soft dry cloth; avoid liquid cleaners |
| Safety | Built-in AC power fuse; grounded power cord |
Frequently Asked Questions - P-9060DH TOA
What is the TOA P-9060DH and what is it used for?
The TOA P-9060DH is a professional-grade digital FM/AM receiver designed for background music and public address systems. It delivers stable radio reception and line-level audio output, making it ideal for retail stores, schools, and commercial facilities.
How do I connect the P-9060DH to my sound system?
Connect the line output of the P-9060DH to an available line input on your amplifier or mixing console using a stereo RCA cable. Ensure both devices are powered off during connection. For mono systems, use the LEFT output only. Then power on and tune to a station.
What kind of antenna is required for FM reception?
For FM, use a 75-ohm coaxial cable connected to the FM antenna terminal. An outdoor directional antenna is recommended for long-range reception. For AM, connect the provided loop antenna to the AM antenna terminals and orient it for best signal strength.
How do I store preset radio stations?
Tune to the desired station, then press the MEMORY button. The preset number indicator will blink. Select a preset number using the channel buttons or remote control, and press MEMORY again to confirm. Repeat for up to 30 presets.
Can I control the P-9060DH with a remote control?
Yes, the P-9060DH includes an IR remote control that can power the unit on/off, adjust volume (if connected to an amplifier with trigger), select presets, and switch between FM/AM bands. The remote has a range of approximately 7 meters.
What are the power requirements for the P-9060DH?
The P-9060DH operates on AC 120 V or 230 V (depending on the version) at 50/60 Hz. Power consumption is 12 watts. Always connect to a properly grounded wall outlet.
How do I mount the P-9060DH in an equipment rack?
The P-9060DH uses a standard 19-inch rack mount configuration with a 1U height. Attach the supplied rack ears to the sides of the unit, insert it into the rack, and secure it with four screws. Ensure proper ventilation around the unit.
How should I clean and maintain the receiver?
Use a soft, dry cloth to wipe the front panel and case. Do not use chemical solvents, alcohol, or abrasive cleaners as they may damage the finish. Periodically check that the ventilation slots are not blocked by dust.
The display shows 'NO STATION' when tuning. What should I do?
First, check the antenna connection and make sure it is properly attached. If you are using AM, rotate the loop antenna for better signal reception. For FM, try a higher-quality antenna or adjust its direction. Also verify that the frequency is in the correct band.
How do I set the AM tuning step to match my region?
The P-9060DH automatically sets the AM tuning step to 9 kHz or 10 kHz depending on the region at initial power-on. If you need to change it, press and hold the BAND button for 3 seconds to toggle between 9 kHz and 10 kHz steps.
User questions about P-9060DH TOA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual P-9060DH - TOA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. P-9060DH by TOA.
USER MANUAL P-9060DH TOA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TOA
Model : P-9060DH
Category : Receiver