CAM-IPTZ-100 - Security Camera Crestron - Free user manual and instructions
Find the device manual for free CAM-IPTZ-100 Crestron in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | PTZ IP Security Camera |
| Mounting Type | Indoor/Outdoor ceiling or wall mount |
| Dimensions (W x H x D) | 15.2 x 15.2 x 20.3 cm (6 x 6 x 8 in) |
| Weight | 1.2 kg (2.6 lbs) |
| Power Supply | PoE (Power over Ethernet) IEEE 802.3af, 12V DC |
| Power Consumption | 8W nominal |
| Image Sensor | 1/2.8" progressive scan CMOS |
| Resolution | 1920x1080 (Full HD) at 30 fps |
| Lens | 4.7-94 mm motorized zoom, F1.6-F3.5 |
| Pan Range | 360° endless |
| Tilt Range | -10° to +90° |
| Zoom | 20x optical zoom |
| Night Vision | 12 IR LEDs, up to 50m range |
| Video Compression | H.265, H.264, MJPEG |
| Network Interface | 10/100 Mbps Ethernet (RJ-45) |
| Audio | Built-in microphone and speaker |
| Ingress Protection | IP66 weatherproof rating |
| Operating Temperature | -40°C to +60°C |
| Storage | MicroSD card slot up to 256 GB |
| Protocols | ONVIF, RTSP, FTP, HTTP |
| Maintenance | Clean lens with soft dry cloth; ensure vents are unobstructed |
| Repair and Spare Parts | Modular design allows replacement of motor, lens, and IR board |
| Included Accessories | Mounting bracket, screws, waterproof connectors, quick start guide |
Frequently Asked Questions - CAM-IPTZ-100 Crestron
How do I reset the Crestron CAM-IPTZ-100 to factory defaults?
Press and hold the reset button on the underside of the camera for 10 seconds. The camera will reboot and restore all settings to factory defaults.
Can I power the camera using Power over Ethernet (PoE)?
Yes, the CAM-IPTZ-100 supports PoE (IEEE 802.3af). Simply connect an Ethernet cable from a PoE switch or injector to the camera's RJ-45 port.
What is the maximum resolution and frame rate of this camera?
The camera supports Full HD video at a maximum resolution of 1920x1080 and a frame rate of 30 fps in H.264 or H.265 compression.
Does the camera have night vision capability?
Yes, it is equipped with 12 IR LEDs that provide clear black and white video in complete darkness up to 50 meters (164 feet).
Is the CAM-IPTZ-100 suitable for outdoor use?
Absolutely, the camera has an IP66 weatherproof rating, making it resistant to rain and dust. It can operate in temperatures from -40°C to +60°C.
Can I set up motion detection alerts?
Yes, the camera supports motion detection. You can configure zones and sensitivity via the web interface or the provided Crestron management software to receive email or app push notifications.
What storage options are available?
You can insert a microSD card (up to 256 GB) for onboard recording. Additionally, the camera supports NAS and FTP upload for network storage.
Does the camera support ONVIF compatibility?
Yes, the CAM-IPTZ-100 is comply with ONVIF Profile S, allowing integration with most third-party VMS software and network video recorders.
How do I perform a manual pan/tilt or zoom operation?
Access the camera's web interface and use the PTZ control panel. You can also send commands via the Crestron control system using ONVIF or serial commands.
What is the recommended cleaning and maintenance procedure?
Use a soft, dry microfiber cloth to gently wipe the housing and lens. Avoid using harsh chemicals or water. Periodically check the camera mount and network cable for wear and secure connections.
User questions about CAM-IPTZ-100 Crestron
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual CAM-IPTZ-100 - Crestron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CAM-IPTZ-100 by Crestron.