3730DCP - Measurement Daytronic - Free user manual and instructions
Find the device manual for free 3730DCP Daytronic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Measurement Instrument |
| Brand | Daytronic |
| Model | 3730DCP |
| Category | Measurement |
| Display | Backlit LCD with 5-digit readout |
| Measurement Inputs | Universal inputs for voltage, current, RTD, and thermocouple |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Dimensions (W x H x D) | 144 x 72 x 120 mm |
| Weight | 0.8 kg |
| Functions | Real-time monitoring, data logging, peak hold, tare, and alarm output |
| Communication | RS-232 and RS-485 serial interfaces |
| Sampling Rate | 10 readings per second |
| Accuracy | +-0.1% of full scale |
| Operating Temperature | 0-50 Degrees Celsius |
| Storage Temperature | -20-70 Degrees Celsius |
| Humidity Range | 5-95% RH non-condensing |
| Front Panel Protection | IP65 rated for dust and water resistance |
| Mounting | Panel mount with included brackets |
| Maintenance | Clean with a soft, dry cloth; avoid solvents |
| Safety Compliance | CE marked with overvoltage and short-circuit protection |
| Spare Parts & Repairability | Replaceable terminal blocks and internal fuses; manufacturer service available |
| Included Accessories | Power cord, user manual on CD |
Frequently Asked Questions - 3730DCP Daytronic
How do I connect a thermocouple to the 3730DCP?
Connect the thermocouple wires to the input terminals designated for thermocouple type (J, K, T, etc.). Refer to the wiring diagram in the manual to ensure correct polarity and use the appropriate compensator cable if needed.
Can the 3730DCP log data over long periods?
Yes, the device supports data logging with a configurable sampling rate. You can store readings to internal memory or stream via RS-232/RS-485 to a PC for continuous monitoring.
How do I set an alarm threshold?
Navigate to the alarm setup menu from the front panel. Enter the desired high or low setpoint, and assign the alarm output relay action (normally open or closed). The alarm will trigger when the measured value crosses the setpoint.
What is the maximum input voltage the 3730DCP can handle?
The universal input accepts up to 10 VDC or 20 mA for current loops. For higher voltages, use an external voltage divider or signal conditioner to avoid damage.
Can I use the device with a 4-20 mA sensor?
Yes, the 3730DCP has a 4-20 mA current input mode. Configure the input type and scaling range to match your sensor output, then calibrate as described in the manual.
How do I perform a factory reset on the 3730DCP?
Press and hold the 'Enter' and 'ESC' keys for 5 seconds, then select 'Reset' from the setup menu. This restores all parameters to their default factory settings.
Is the display readable in direct sunlight?
The LCD has a bright backlight and high contrast, but direct sunlight may reduce readability. For outdoor use, consider installing a sun shield or mounting the device away from direct light.
Can I connect the 3730DCP to a PLC?
Yes, it supports Modbus RTU via RS-485, which is commonly used with PLCs. Configure the device as a slave with the correct baud rate and address, then wire it to your PLC's serial port.
How often should the device be calibrated?
Daytronic recommends calibration at least once a year or after any significant environmental change. Use a precision voltage/current source to verify accuracy and adjust the internal calibration settings if necessary.
What power supply is required for the 3730DCP?
The device operates on a universal AC supply of 100-240 VAC, 50/60 Hz. It also has an internal fuse for protection; always replace the fuse with the same rating (e.g., 250V 1A).
User questions about 3730DCP Daytronic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measurement in PDF format for free! Find your manual 3730DCP - Daytronic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 3730DCP by Daytronic.
USER MANUAL 3730DCP Daytronic
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Daytronic
Model : 3730DCP
Category : Measurement