Steel Leather - Uncategorized Electro Harmonix - Free user manual and instructions
Find the device manual for free Steel Leather Electro Harmonix in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Guitar Effects Pedal |
| Brand | Electro Harmonix |
| Model | Steel Leather |
| Effect Type | Distortion / Overdrive |
| Controls | Volume, Tone, Drive |
| Inputs | 1/4" mono jack (instrument) |
| Outputs | 1/4" mono jack (amplifier) |
| Power Supply | 9V battery or 9V DC adapter (center-negative) |
| Current Draw | 10 mA |
| Dimensions | 2.75" x 4.5" x 2.25" (70 x 114 x 57 mm) |
| Weight | 0.5 lb (230 g) |
| Housing | Durable steel chassis |
| LED Indicator | Yes, lights when effect is active |
| Bypass | True bypass |
| Cleaning | Wipe with a dry cloth |
| Safety | Keep away from water and moisture |
| Spare Parts | Available directly from manufacturer |
| Warranty | 1 year limited warranty |
| Included Accessories | Pedal, user manual |
| Country of Origin | USA |
Frequently Asked Questions - Steel Leather Electro Harmonix
How do I power the Steel Leather pedal?
The pedal can be powered with a standard 9V battery or a 9V DC adapter with center-negative polarity. Connect the adapter to the power jack on the top edge of the pedal.
Can I use a battery?
Yes, the Steel Leather operates on a standard 9V battery. To install it, remove the bottom plate, connect the battery clip, and slide the battery into the compartment.
What is the difference between the Drive and Volume controls?
The Drive knob adjusts the amount of distortion or overdrive gain. The Volume knob sets the overall output level. The Tone knob shapes the high-frequency response for brighter or darker sounds.
How do I achieve a clean tone?
To get a clean tone, set the Drive knob to a low value (near 8 o'clock) and adjust the Volume to match your desired output. Keep the Tone at a neutral position around 12 o'clock.
Does this pedal have true bypass?
Yes, the Steel Leather features true bypass. When the effect is switched off, the signal goes straight from the input to the output, preserving your guitar's original tone.
What type of adapter should I use?
Use a 9V DC adapter with a center-negative plug, capable of supplying at least 10 mA. Standard guitar pedal power supplies are compatible.
How do I clean the pedal?
Clean the exterior with a dry, soft cloth. Do not use any liquids, sprays, or abrasive cleaners that could damage the chassis or electronic components.
How do I change the battery?
Turn the pedal upside down, remove the screws on the bottom plate, and detach the plate. Disconnect the old battery clip, connect the new 9V battery, and secure the plate back in place.
Is the pedal suitable for bass guitar?
Yes, the Steel Leather can be used with bass guitar. The Tone control helps you maintain low-end clarity while adding distortion. Experiment with the Drive setting to fit your style.
What is the warranty period?
The Steel Leather comes with a 1-year limited warranty from Electro Harmonix, covering defects in materials and workmanship under normal use.
User questions about Steel Leather Electro Harmonix
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Steel Leather - Electro Harmonix and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Steel Leather by Electro Harmonix.
USER MANUAL Steel Leather Electro Harmonix
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Electro Harmonix
Model : Steel Leather
Category : Uncategorized