CT-902HP-5K - Pump Panduit - Free user manual and instructions
Find the device manual for free CT-902HP-5K Panduit in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of Product | Hydraulic Pump |
| Brand | Panduit |
| Model | CT-902HP-5K |
| Category | Pump |
| Intended Use | Crimping and cutting applications |
| Maximum Operating Pressure | 10,000 psi (69 MPa) |
| Power Source | 18V lithium-ion battery |
| Battery Capacity | 2.5 Ah |
| Hydraulic Fluid | ATF (Dexron III) |
| Hydraulic Hose Length | 48 inches (1.2 m) |
| Cycle Time | Approximately 30 seconds |
| Motor Type | 18V DC motor |
| Dimensions (L x W x H) | 13.5 x 9.0 x 6.5 inches |
| Weight | 14.5 lbs (6.6 kg) |
| Protection Class | IP20 |
| Operating Temperature | 32°F to 122°F (0°C to 50°C) |
| Charge Time | 45 minutes |
| LED Indicator | Yes, for battery and operation status |
| Compatible Heads | Panduit remote crimping heads up to max pressure |
| Maintenance | Check hydraulic fluid level and inspect for leaks |
| Cleaning | Wipe with a clean cloth; avoid solvents |
| Safety Features | Pressure relief valve, trigger lock, low oil indicator |
| Spare Parts Availability | Service kits available from Panduit distributors |
| Repairability | Modular design, serviceable by qualified technicians |
| Certification | CE, RoHS |
Frequently Asked Questions - CT-902HP-5K Panduit
What hydraulic fluid should I use in the Panduit CT-902HP-5K?
Use ATF (Dexron III) or equivalent. Check the fluid level regularly; refill through the vent plug.
How do I charge the battery?
Insert the battery pack into the charger, plug into a standard outlet. The LED indicator will show charging status; fully charge in about 45 minutes.
Can I use this pump with all Panduit crimping heads?
The CT-902HP-5K is designed for use with Panduit remote crimping heads up to maximum pressure. Always verify compatibility with your head model.
How often should I purge the hydraulic system?
Purge the system if the pump operates erratically or after hydraulic fluid replacement. Follow manual procedure: open bleed valve and cycle pump.
What maintenance is required regularly?
Inspect hoses and connections for leaks, check fluid level, and keep the pump exterior clean. Also lubricate the ram collar if applicable.
Is the CT-902HP-5K safe to use in wet conditions?
No, the pump is rated IP20 and should only be used in dry environments. Keep it away from water and moisture.
How do I release pressure after a crimping operation?
Use the pressure release trigger located on the pump handle. Do not disconnect the hose while system is under pressure.
What is the maximum operating pressure?
The pump delivers up to 10,000 psi (69 MPa) for reliable crimping of heavy-duty connectors.
What should I do if the pump loses power?
Check the battery charge, replace if needed. Also inspect the motor brushes and hydraulic fluid level. If problem persists, contact service.
Are replacement parts available?
Yes, Panduit offers service kits (O-rings, seals, valves) and complete motor assemblies through authorized distributors.
User questions about CT-902HP-5K Panduit
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pump in PDF format for free! Find your manual CT-902HP-5K - Panduit and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CT-902HP-5K by Panduit.
USER MANUAL CT-902HP-5K Panduit
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Panduit
Model : CT-902HP-5K
Category : Pump