Stealthbox SB-CAN-MVX3PASS/10TW3 - Subwoofer JL Audio - Free user manual and instructions
Find the device manual for free Stealthbox SB-CAN-MVX3PASS/10TW3 JL Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Subwoofer Enclosure |
| Brand | JL Audio |
| Model | Stealthbox SB-CAN-MVX3PASS/10TW3 |
| Subwoofer Size | 10 inches |
| Subwoofer Model | 10TW3 |
| Impedance | Dual 4-ohm (2 or 8 ohms) |
| RMS Power Handling | 400 Watts |
| Peak Power Handling | 800 Watts |
| Sensitivity | 82 dB |
| Frequency Response | 30 - 200 Hz |
| Enclosure Type | Sealed fiberglass enclosure |
| Design | Vehicle-specific custom fit |
| Covering | Factory-matched carpet |
| Installation | Direct fit, no cutting required |
| Recommended Amplifier Power | 200 - 400W RMS |
| Weight | Approx. 14.5 lbs |
| Dimensions (L x W x H) | 20.5 x 13.75 x 8.25 inches |
| Maintenance | Wipe with a dry cloth |
| Safety | Keep away from moisture |
| Repairability | Replaceable subwoofer driver |
| Warranty | 2 years |
| Manual | PDF available for free download |
Frequently Asked Questions - Stealthbox SB-CAN-MVX3PASS/10TW3 JL Audio
What is the JL Audio Stealthbox SB-CAN-MVX3PASS/10TW3?
The Stealthbox is a vehicle-specific subwoofer enclosure from JL Audio that includes a factory-matching finish and a high-performance 10TW3 subwoofer. It is designed to deliver excellent bass while saving space.
Is the Stealthbox powered or passive?
The Stealthbox is a passive subwoofer enclosure. It requires an external amplifier to power the 10TW3 subwoofer. No built-in amplifier is included.
What are the dimensions and weight of the enclosure?
The exact dimensions can vary by vehicle fit, but the typical Stealthbox for a 10-inch sub measures approximately 20.5 x 13.75 x 8.25 inches and weighs about 14.5 lbs. Always check the manual for exact measurements.
What is the impedance and power handling?
The subwoofer is a dual 4-ohm configuration, resulting in a final impedance of 2 ohms or 8 ohms depending on wiring. It handles 400W RMS and 800W peak power.
Which vehicle is SB-CAN-MVX3PASS/10TW3 designed for?
The model number indicates a custom-fit enclosure for a specific vehicle, likely a Mazda model (e.g., CX-3). JL Audio Stealthboxes are designed to fit the vehicle exactly without sacrificing cargo space. Contact JL Audio for exact fitment.
Does the Stealthbox come with a protective grille?
The Stealthbox typically does not include a grille, as it is designed to be mounted in a location that protects the subwoofer. However, you can add a JL Audio grille if desired for extra protection.
How do I maintain and clean the Stealthbox?
To maintain the enclosure, simply wipe it with a dry or slightly damp cloth. Avoid harsh chemicals or excessive moisture. Do not pressure wash or submerge the enclosure.
Can the subwoofer driver be replaced?
Yes, the 10TW3 subwoofer is a replaceable component. If the subwoofer fails, it can be reconed or replaced with an identical model. The enclosure is not disposable.
What amplifier is recommended for this subwoofer?
JL Audio recommends an amplifier delivering 200-400W RMS at the chosen impedance (2 or 8 ohms). A mono subwoofer amplifier is ideal for best performance.
How can I download the manual for this product?
The free user manual can be downloaded as a PDF from the JL Audio website or third-party manual sites like notice-facile.com. The manual includes installation instructions, specifications, and wiring diagrams.
User questions about Stealthbox SB-CAN-MVX3PASS/10TW3 JL Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual Stealthbox SB-CAN-MVX3PASS/10TW3 - JL Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Stealthbox SB-CAN-MVX3PASS/10TW3 by JL Audio.