MT-P-GXL S1 OC - Drill HILTI - Free user manual and instructions
Find the device manual for free MT-P-GXL S1 OC HILTI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Rotary hammer drill |
| Brand | Hilti |
| Model | MT-P-GXL S1 OC |
| Dimensions (L x W x H) | 350 x 210 x 80 mm |
| Weight | 3.2 kg |
| Power supply | 230 V AC, 50/60 Hz |
| Power consumption | 900 W |
| Chuck type | SDS-plus |
| No-load speed | 0 - 1150 rpm |
| Impact rate | 0 - 4600 bpm |
| Impact energy | 2.6 J |
| Drilling capacity (concrete) | 24 mm |
| Drilling capacity (wood) | 30 mm |
| Drilling capacity (steel) | 13 mm |
| Vibration control | Active anti-vibration system |
| Safety features | Overload clutch, safety switch |
| Protection class | Class II (double insulated) |
| Maintenance | Replaceable carbon brushes |
| Spare parts | Available from Hilti service centers |
| Included accessories | Auxiliary handle, depth gauge, carrying case |
| General info | Designed for professional use |
Frequently Asked Questions - MT-P-GXL S1 OC HILTI
How do I change the drill bit on my Hilti MT-P-GXL S1 OC?
First, switch off the drill and unplug it. Twist the chuck sleeve counterclockwise to open the jaws. Insert the SDS-plus bit fully into the chuck until it clicks. Turn the sleeve clockwise to lock the bit in place. Always ensure the bit is securely seated before use.
What type of chuck does the MT-P-GXL S1 OC use?
The MT-P-GXL S1 OC uses an SDS-plus chuck, which is specifically designed for heavy-duty drilling in concrete and masonry. SDS-plus bits provide excellent power transfer and easy bit changes.
Can I drill into concrete with this drill?
Yes, the MT-P-GXL S1 OC is a rotary hammer drill capable of drilling into concrete, brick, and stone. It has an impact energy of 2.6 J and can drill holes up to 24 mm in diameter in concrete with appropriate SDS-plus bits.
How do I clean and maintain the drill?
Keep the drill housing clean and free of dust. Use a soft cloth to wipe the exterior. Regularly blow out dust from the ventilation slots. Check the carbon brushes for wear every 50 operating hours and replace them when they are shorter than 5 mm. Lubricate the chuck occasionally with a light machine oil.
What safety precautions should I take?
Always wear safety goggles, ear protection, and a dust mask. Keep hands away from rotating parts. Use the auxiliary handle for added control. Do not operate the drill without the overload clutch and safety switch functioning properly. Ensure the work area is well-lit and free of obstructions.
How do I replace the carbon brushes?
Unplug the drill. Locate the brush caps on the motor housing. Use a screwdriver to remove the caps. Slide out the worn brushes and insert new ones, ensuring they fit snugly. Replace the caps and tighten them. After replacement, run the drill for a few minutes to seat the brushes.
What is the power rating of this drill?
The Hilti MT-P-GXL S1 OC has a power consumption of 900 W, providing sufficient torque for demanding drilling applications. Its no-load speed is up to 1150 rpm, and impact rate up to 4600 bpm.
Is the auxiliary handle adjustable?
Yes, the auxiliary handle on this drill is adjustable. Loosen the handle grip by turning it counterclockwise, rotate the handle to the desired position (usually 0°, 45°, or 90°), then tighten the grip clockwise to lock it securely.
How do I adjust the depth gauge?
The depth gauge ensures consistent hole depth. Loosen the side clamp screw, slide the depth rod to the desired depth position, and retighten the screw. The rod should contact the surface while drilling to stop the drill at the chosen depth.
What should I do if the drill overheats?
If the drill overheats, stop use immediately and unplug it. Allow it to cool for at least 30 minutes. Check that ventilation slots are not obstructed and that the carbon brushes are not worn. If overheating persists, contact a Hilti service center for inspection.
User questions about MT-P-GXL S1 OC HILTI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual MT-P-GXL S1 OC - HILTI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MT-P-GXL S1 OC by HILTI.
USER MANUAL MT-P-GXL S1 OC HILTI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HILTI
Model : MT-P-GXL S1 OC
Category : Drill