HE30M01AAG - Water heaters and boilers HOTPOINT - Free user manual and instructions
Find the device manual for free HE30M01AAG HOTPOINT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Water Heater |
| Brand | Hotpoint |
| Model | HE30M01AAG |
| Capacity | 30 liters |
| Mounting | Vertical wall-mounted |
| Dimensions (H x W x D) | 600 x 360 x 360 mm (approx) |
| Weight | 15 kg (approx) |
| Water Connection | 1/2" BSP |
| Power Supply | 220-240 V ~ 50 Hz |
| Heating Power | 1500 W |
| Thermostat Range | 30-75 °C |
| Maximum Water Temperature | 75 °C |
| Pressure Rating | 0.6 MPa (6 bar) |
| Protection Class | IPX4 |
| Energy Efficiency Class | C |
| Heating Time | About 1.5 hours to reach 60 °C |
| Tank Material | Enamelled steel |
| Corrosion Protection | Magnesium anode |
| Safety Devices | Pressure relief valve, thermal cut-off |
| Functions | Adjustable thermostat, overheating protection |
| Maintenance | Periodic anode check, descaling recommended |
| Cleaning | Wipe with damp cloth, avoid abrasives |
| Spare Parts | Thermostat, heating element, anode |
| Repairability | Accessible components for servicing |
Frequently Asked Questions - HE30M01AAG HOTPOINT
How do I set the water temperature?
Turn the thermostat dial on the front of the heater to your desired temperature, typically between 30 °C and 75 °C. The thermostat will automatically keep the water at that set point.
How often should I replace the magnesium anode?
Inspect the magnesium anode every year and replace it every 2 to 3 years, depending on water hardness. This prevents tank corrosion and extends the heater's lifespan.
Why is water leaking from the pressure relief valve?
A small amount of water dripping from the pressure relief valve is normal during heating as pressure builds. If it leaks continuously, the valve may need replacement or the tank pressure may be too high.
How do I drain the water heater
Turn off the power and cold water supply, then connect a hose to the drain valve at the bottom of the unit. Open the valve and let the water flow out. Always use warm or cold water to rinse the tank afterwards.
What power supply is required?
The heater requires a 220-240 V AC 50 Hz supply, with a 1500 W heating element. It should be connected via a standard earthed socket and preferably on a dedicated circuit.
Can the heater be installed horizontally?
This model is designed for vertical wall-mounting only. Installing horizontally may damage the heating element or cause improper operation of the safety valve.
My water isn't heating up, what should I check?
First, check that the power supply is connected and the circuit breaker is on. If the heater still doesn't work, the thermostat or heating element may be faulty and should be inspected by a qualified technician.
How do I clean the outside of the heater?
Wipe the exterior with a soft damp cloth and mild detergent. Do not use abrasive materials or solvents, as they can damage the finish and compromise safety.
Is there an anti-freeze mode?
This model does not have a dedicated anti-freeze mode. If frost is expected, drain the water heater completely to prevent ice damage to the tank and pipes.
How long does it take to heat water?
With a 1500 W heating element, a full 30-liter tank heats from cold to about 60 °C in roughly 1.5 hours. The actual time depends on the inlet water temperature and the set thermostat level.
User questions about HE30M01AAG HOTPOINT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heaters and boilers in PDF format for free! Find your manual HE30M01AAG - HOTPOINT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HE30M01AAG by HOTPOINT.