CILT00T6 - Security Camera Speco Technologies - Free user manual and instructions
Find the device manual for free CILT00T6 Speco Technologies in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera |
| Brand | Speco Technologies |
| Model | CILT00T6 |
| Image Sensor | 1/2.7" progressive scan CMOS |
| Resolution | 1920 x 1080 pixels |
| Lens | 2.8 mm fixed lens |
| Field of View | 90° diagonal view |
| Night Vision | Infrared LEDs with 30 m range |
| Housing | Weatherproof aluminum housing (IP66) |
| Power Supply | 12 V DC or Power over Ethernet (PoE 802.3af) |
| Power Consumption | Max. 5 W |
| Connectivity | RJ45 10/100 Base-T Ethernet port |
| Storage | MicroSD card slot (up to 128 GB) |
| Motion Detection | Built-in PIR sensor and software motion detection |
| Audio | Two-way audio with built-in microphone and speaker |
| Operating Temperature | -30°C to 60°C (-22°F to 140°F) |
| Dimensions | 7.2 cm x 7.2 cm x 12.5 cm (2.8" x 2.8" x 4.9") |
| Weight | 0.6 kg (1.32 lb) |
| Mounting | Wall or ceiling mount bracket included |
| Warranty | 2-year limited warranty |
| Maintenance | Clean lens with a soft, dry microfiber cloth; keep vents unobstructed. |
| Safety | Use a certified power adapter; disconnect power before any maintenance. |
| Spare Parts & Reparability | Replacement lens, IR LED board, and housing available from authorized dealers. |
Frequently Asked Questions - CILT00T6 Speco Technologies
How do I connect the CILT00T6 camera to my Wi-Fi network?
The CILT00T6 is a wired IP camera. To connect it to your network, plug an Ethernet cable from the camera's RJ45 port to your router. Then use the Speco setup app to configure the network settings. For a wireless connection, use an optional Wi-Fi adapter if supported. Ensure the camera is powered via PoE or a 12V DC adapter.
What is the default IP address of the camera?
By default, the camera is set to DHCP. Check your router's connected devices list to find the IP address assigned to the camera. You can also use the Speco Discovery Tool on your computer to locate the camera on your local network.
How do I reset the CILT00T6 to factory defaults?
Locate the reset button on the camera or its cable. Press and hold it for 10 seconds while the camera is powered on. The camera will reboot with factory settings. The default username is "admin" and password is usually "admin" or blank, but check the manual for specifics.
How can I set up motion detection alerts?
Access the camera's web interface or Speco app. Go to Alarm > Motion Detection. Draw detection zones, set sensitivity, and configure the action (e.g., send email, push notification, or record a snapshot).
How do I update the firmware of my security camera?
Download the latest firmware from Speco Technologies' official website. Go to the camera's Maintenance > Upgrade page. Upload the firmware file and wait for the camera to reboot. Do not disconnect power during the update.
What is the proper way to mount the CILT00T6 camera outdoors?
Use the included mounting bracket and screws. Attach the bracket to a solid surface such as concrete or wood. Ensure the camera is positioned with a clear view of the monitored area. Seal cable connections with waterproof connectors to prevent moisture ingress.
What power adapter should I use for the camera?
The camera accepts 12V DC (2A) or PoE (802.3af). If using a power adapter, it must be a regulated power supply with at least 12V and 1A current. Using an unregulated adapter may damage the camera.
How can I view the camera remotely on my smartphone?
Ensure the camera is connected to the internet. Create an account in the Speco app and add the camera by scanning its QR code or entering its UID. You can then view live video from anywhere with a stable internet connection.
What should I do if there is no video signal on the monitor?
First, check if the camera is powered and the Ethernet cable is firmly connected. Verify the IP address is correct and ping the camera. If using PoE, confirm the PoE switch is supplying power. Reset the camera if necessary, and adjust the camera settings in the app.
How do I clean the camera lens without damaging it?
Use a soft, dry microfiber cloth to gently wipe the lens. Avoid using harsh chemicals or abrasive materials. If fingerprints remain, slightly dampen the cloth with pure water or a lens cleaning solution. Ensure the camera is off when cleaning the lens.
User questions about CILT00T6 Speco Technologies
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual CILT00T6 - Speco Technologies and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CILT00T6 by Speco Technologies.
USER MANUAL CILT00T6 Speco Technologies
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Speco Technologies
Model : CILT00T6
Category : Security Camera