CP-X205 - Video projector HITACHI - Free user manual and instructions
Find the device manual for free CP-X205 HITACHI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Video projector |
| Brand | Hitachi |
| Model | CP-X205 |
| Display Technology | 3LCD |
| Native Resolution | 1024 x 768 (XGA) |
| Brightness | 2000 ANSI lumens |
| Contrast Ratio | 400:1 |
| Aspect Ratio | 4:3 |
| Keystone Correction | Manual vertical, +/- 30 degrees |
| Lamp Power | 200 W |
| Lamp Life | 2000 hours (standard mode), 3000 hours (economic mode) |
| Projection Size | 30 to 300 inches diagonal |
| Projection Distance | 1.2 to 11.4 meters |
| Video Inputs | VGA, S-Video, Composite, Audio |
| Control Inputs | RS-232C for remote control |
| Outputs | VGA monitor out, Audio out |
| Noise Level | 29 dB (economic mode) |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 280 W max, 1 W standby |
| Weight | 1.8 kg |
| Dimensions (W x D x H) | 274 x 220 x 59.5 mm |
| Security | Kensington lock slot |
| Spare Parts | Replacement lamp and air filter |
| Maintenance | Clean air filter regularly |
Frequently Asked Questions - CP-X205 HITACHI
How to connect a computer?
Use a VGA cable to connect the computer's monitor output to the COMPUTER IN port on the projector. Then press the SOURCE button to select Computer. For audio, connect a 3.5mm audio cable to the AUDIO IN port.
How to replace the projector lamp?
Turn off and unplug the projector. Wait 45 minutes for the lamp to cool. Remove the lamp cover screw, slide out the old lamp, insert the new lamp (model DT01307), tighten screws and replace cover. Reset lamp timer via the menu.
How to clean the air filter?
The air filter should be cleaned every 100 hours of use. Remove the filter cover, take out the filter, vacuum it gently or wash with water if possible, but dry it thoroughly before reinstallation.
What is the best projection distance for a 100-inch screen?
To get a 100-inch diagonal image, place the projector approximately 3.3 to 3.9 meters from the screen. Use the zoom ring to fine-tune the size.
Can I play HDMI sources on this projector?
The CP-X205 has no HDMI input, but you can use a compatible VGA adapter or a component video connection via a converter. HDMI to VGA adapters carry video only; connect audio separately to the AUDIO IN port.
How to adjust keystone correction?
Use the KEYSTONE button on the projector or remote control, then use the cursor keys to correct vertical distortion. The range is +/- 30 degrees.
How to reset the lamp hour counter?
After replacing the lamp, go to the Lamp Time option in the settings menu, select Lamp Time Reset, and press ENTER to reset the counter.
Can the projector be mounted on the ceiling?
Yes, the CP-X205 supports ceiling mounting. Use a compatible ceiling mount and secure it to the four M4 screw holes on the bottom. In the settings menu, set the Ceiling orientation.
What should I do if the picture is blurry?
First, adjust the focus ring. If the projection distance is too short or too long, the focus may not be smooth. Correct keystone with the KEYSTONE button. If still blurry, reset the projector settings.
What is the lamp life and where can I buy spare parts?
The lamp lasts about 2000 hours in standard mode and 3000 hours in economic mode. Replacement lamps are available from Hitachi dealers or online spare parts shops. Search for Hitachi CP-X205 lamp model DT01307.
User questions about CP-X205 HITACHI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video projector in PDF format for free! Find your manual CP-X205 - HITACHI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CP-X205 by HITACHI.
USER MANUAL CP-X205 HITACHI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HITACHI
Model : CP-X205
Category : Video projector