DS-2CE56D0T-IT1F(C) - Security Camera Hikvision - Free user manual and instructions
Find the device manual for free DS-2CE56D0T-IT1F(C) Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera |
| Brand | Hikvision |
| Model | DS-2CE56D0T-IT1F(C) |
| Image Sensor | 2MP CMOS |
| Resolution | 1920 (H) × 1080 (V) pixels |
| Lens | Fixed focal length, 2.8 mm (3.6 mm optional) |
| Minimum Illumination | 0.01 Lux @ (F1.2, AGC ON), 0 Lux with IR |
| Night Vision | Infrared distance up to 20 m (65 ft) |
| Video Output | 1 HD-TVI output, switchable to AHD/CVI/CVBS |
| Power Supply | 12 VDC ± 25%, max. 3.5 W |
| Protection Rating | IP67 (weatherproof) |
| Material | Metal housing with plastic components |
| Mounting | Mounting bracket included for wall or ceiling |
| Operating Temperature | -40 °C to 60 °C (-40 °F to 140 °F) |
| Relative Humidity | 90% or less (non-condensing) |
| Dimensions | φ 70 mm × 170 mm (φ 2.76" × 6.69") |
| Weight | Approximately 300 g (0.66 lb) |
| Key Functions | 3D DNR, SMART IR, DWDR, AGC |
| Included Accessories | Mounting bracket, screws, quick start guide |
| Cleaning and Maintenance | Wipe gently with a soft dry cloth |
| Repair and Spare Parts | No user-serviceable parts; contact qualified technicians |
Frequently Asked Questions - DS-2CE56D0T-IT1F(C) Hikvision
How do I connect this camera to a Hikvision DVR?
Use a coaxial cable to connect the HD-TVI video output of the camera to an HD-TVI input on a compatible Hikvision DVR. Power the camera with a 12 VDC adapter.
What is the maximum cable length for video transmission?
HD-TVI supports transmission distances up to 500 m for 2MP signals, depending on cable quality. For longer runs, use a higher-quality coaxial cable or an active amplifier.
Can I use this camera with an older analog DVR?
The camera outputs HD-TVI, but it is switchable to CVBS mode (standard analog). Set the camera video mode to CVBS to use it with older DVRs, though the resolution will be limited to analog quality.
How do I reset the camera to factory settings?
There is no reset button on this model. To reset, power cycle the camera or use a DVR menu if it supports remote configuration for TurboHD cameras.
How can I adjust the viewing angle after installation?
Loosen the mounting bracket, tilt the camera to the desired direction, and tighten it firmly. The bracket allows 3-axis adjustment (pan, tilt, rotate).
What is the recommended installation height?
For optimal coverage, install the camera 2.5 to 3.5 meters (8-12 feet) above the ground, aiming slightly downward to capture faces and activity clearly.
Is this camera suitable for outdoor use?
Yes, the IP67 rating ensures it is dust-tight and protected against heavy rain. The operating temperature range also withstands extreme weather conditions.
What power supply do I need?
The camera requires a 12 VDC power supply (not included). Use a regulated adapter with at least 500 mA output to ensure stable operation.
Can I replace the lens with a different focal length?
No, the lens is fixed and not user-replaceable. If you need a different field of view, choose a camera with an adjustable or varifocal lens.
Does this camera support audio recording?
This model does not have a built-in microphone and does not support audio over the HD-TVI coaxial connection. It is designed for video surveillance only.
User questions about DS-2CE56D0T-IT1F(C) Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual DS-2CE56D0T-IT1F(C) - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-2CE56D0T-IT1F(C) by Hikvision.