11I - Sink SMEG - Free user manual and instructions

Product Type	Bathroom sink
Brand	Smeg
Model	11I
Material	High-quality ceramic with antibacterial glaze
Finish	Glossy white
Shape	Rectangular
Installation Type	Drop-in or countertop mounted
Number of Faucet Holes	1
Overflow	Yes
Dimensions (W x D x H)	40 x 40 x 15 cm (approx.)
Weight	8 kg (approx.)
Water Connection	Standard 1/2 inch fitting
Drainage	1 1/4 inch drain included
Cleanability	Non-porous ceramic resists stains and odors
Care	Use non-abrasive cleaners and soft cloth
Durability	Chip-resistant glazed surface
Repairability	Replaceable components and spare parts available
Accessories	Mounting kit and overflow cap included
Warranty	2-year manufacturer warranty

Frequently Asked Questions - 11I SMEG

How do I install the Smeg 11I sink?

Place the sink on the countertop, trace the outline, and cut the opening. Apply a bead of silicone sealant around the cutout, lower the sink into place, and secure it with the included mounting kit.

What type of faucet is compatible with this sink?

The sink has a single faucet hole, so it works with single-hole deck-mounted faucets using a standard 1/2 inch connection.

How should I clean the ceramic surface?

Use warm water and a mild dish soap with a soft cloth. Avoid abrasive pads or harsh chemicals that can dull the glossy finish.

Does the sink come with a drain?

Yes, a 1 1/4 inch stainless steel drain is included with the sink. An overflow cap is also provided.

Can the sink be installed as an undermount model?

No, the 11I is designed for drop-in installation. Undermounting is not recommended, as it might compromise the seal.

What is the recommended mounting hole size?

The approximate cutout should be 38 x 38 cm to allow a 1 cm overlap around the rim. Always check the exact template before cutting.

Is the ceramic resistant to scratches?

The glazed ceramic is highly scratch-resistant, but avoid dragging sharp metal objects across the surface to preserve its appearance.

How do I remove hard water stains from the sink?

Mix equal parts white vinegar and water, apply with a soft sponge, let sit for 5 minutes, then rinse thoroughly. Do not let vinegar sit too long on the glaze.

Does the sink have a warranty?

Yes, Smeg offers a 2-year manufacturer warranty against manufacturing defects. Spare parts can be ordered through qualified service centers.

Can I order replacement parts if needed?

Yes, items like the overflow cap, mounting clips, and drain assembly are available as spare parts from Smeg customer service or authorized dealers.

USER MANUAL 11I SMEG