HZS-100E - Motion detector Planet - Free user manual and instructions
Find the device manual for free HZS-100E Planet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Motion Detector |
| Brand | Planet |
| Model | HZS-100E |
| Detection Technology | Passive Infrared (PIR) |
| Detection Range | Up to 12 meters |
| Detection Angle | 120 degrees |
| Power Supply | DC 12V or 9V battery |
| Standby Current | Less than 20 mA |
| Operating Temperature | -10°C to +50°C |
| Installation Type | Wall-mounted or ceiling-mounted |
| Output Interface | Relay (NO/NC) and 3.3V control signal |
| Sensitivity Adjustment | Yes, adjustable |
| Time Delay Adjustment | 10 seconds to 10 minutes |
| Day/Night Mode | LDR light sensor, can operate only in darkness |
| Dimensions (L x W x H) | 120 x 80 x 40 mm |
| Weight | 150 g |
| Protection Rating | IP20 (indoor use) |
| Maintenance | Clean lens with a soft dry cloth; do not use solvents |
| Safety | Low voltage operation; install away from heat sources |
| Spare Parts & Repairability | No user-serviceable parts; contact authorized service center |
| General Information | Free user manual available for download in PDF format |
Frequently Asked Questions - HZS-100E Planet
What is the detection range of the HZS-100E?
The detection range is up to 12 meters with a 120-degree detection angle, making it suitable for most indoor rooms.
How do I connect the HZS-100E to an alarm system?
Use the relay output terminals (NO and NC) to connect to your alarm control panel. The relay activates when motion is detected. A 3.3V signal output is also available for direct connection to a microcontroller.
Why does the motion detector not trigger during the day?
The day/night mode uses a light sensor to disable detection when ambient light is high. This prevents false alarms during daylight. Adjust the LDR sensitivity or switch to always-on mode if you need 24/7 operation.
Can I use the HZS-100E outdoors?
The HZS-100E has an IP20 rating, which means it is only protected against solid objects larger than 12mm and not protected against water. It should be installed indoors or in a weatherproof enclosure if used outdoors.
How do I adjust the sensitivity and time delay?
Use the two potentiometers on the device. The sensitivity potentiometer controls the detection threshold, while the time delay potentiometer sets how long the output stays active (10 seconds to 10 minutes). Turn them with a small screwdriver.
What type of power supply does the HZS-100E require?
The device can be powered by a DC 12V power adapter or a 9V battery. The average current consumption is less than 20 mA, so a battery can last for several months in standby.
How do I install the motion detector correctly?
Mount the detector at a height of 2 to 2.5 meters with the lens facing the area you want to monitor. Avoid direct sunlight, heat sources, and moving objects like fans. Secure the bracket and adjust the angle for optimal coverage.
What should I do if the detector gives false alarms?
First, check that the detector is not mounted near a heat source such as a radiator. Reduce the sensitivity to avoid triggering on small animals. Also ensure the time delay is not too short, making the output repeat, and clean the lens if dirty.
Can the HZS-100E work with a 12V battery?
Yes, it can operate on DC 12V. A 12V battery is an acceptable power source as long as it provides a stable voltage between 9V and 15V. The device regulates the voltage internally.
How do I clean and maintain the HZS-100E?
Use a soft dry cloth to clean the front lens. Avoid water and chemical cleaners. Check the mounting bracket periodically and remove any dust from the ventilation openings. No other maintenance is required.
User questions about HZS-100E Planet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Motion detector in PDF format for free! Find your manual HZS-100E - Planet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HZS-100E by Planet.
USER MANUAL HZS-100E Planet
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Planet
Model : HZS-100E
Category : Motion detector