MW-VT - Uncategorized Middle Atlantic - Free user manual and instructions
Find the device manual for free MW-VT Middle Atlantic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wall mount for flat-panel displays and A/V equipment |
| Brand | Middle Atlantic |
| Model | MW-VT |
| Construction Material | Heavy-gauge cold-rolled steel |
| Finish | Black powder-coated |
| Compatible VESA Patterns | 100 x 100, 200 x 200, 300 x 300, 400 x 400 mm |
| Maximum Weight Capacity | 80 lbs (36.3 kg) |
| Tilt Adjustment | 0 to 15 degrees |
| Swivel Adjustment | 0 to 20 degrees |
| Dimensions (H x W x D) | 28.0 x 21.0 x 2.5 in (71.1 x 53.3 x 6.4 cm) |
| Net Weight | 9.4 lbs (4.3 kg) |
| Power Supply | No power required, passive mounting hardware |
| Mounting Options | Solid wall, wooden studs, concrete/brick with appropriate anchors |
| Included Hardware | Dual stud mounting plate, bolts, spacers, washers and Allen wrench |
| Installation Skill Level | Moderate; two-person installation recommended |
| Safety Features | Anti-tip safety lock, foam padding to prevent screen damage |
| Maintenance / Cleaning | Wipe with a dry microfiber cloth; avoid solvents and abrasive cleaners |
| Spare Parts / Repairability | Replacement screws and spacers available; mount can be disassembled with standard Phillips wrench |
| Warranty | 5-year limited warranty from Middle Atlantic |
| Country of Origin | USA |
Frequently Asked Questions - MW-VT Middle Atlantic
What VESA patterns are compatible with the MW-VT mount?
The MW-VT supports most common VESA patterns up to 400 x 400 mm, including 100 x 100, 200 x 200 and 300 x 300 mm. Always verify your display's screw holes before ordering.
What tools do I need to install it?
You will need a Phillips screwdriver, a socket wrench or adjustable wrench, a stud finder, a drill and a level. The included Allen wrench handles the final bracket adjustment.
Can the MW-VT be mounted on drywall?
Drywall alone is not suitable. The mount must be anchored into wood studs or solid concrete/brick. If attaching to hollow drywall, use appropriate heavy-duty toggle bolts (not included).
How much weight can the MW-VT support?
Maximum load is 80 lbs (36.3 kg). Make sure the combined weight of your screen and any attached accessories remains below this rating.
Does the mount tilt and swivel?
Yes, the MW-VT offers 0 to 15 degrees tilt and 0 to 20 degrees swivel. Adjust the friction screws after mounting to set the desired viewing angle.
Can I use this mount with a soundbar?
It is primarily designed for a flat panel display. An optional soundbar bracket can be added if your audio device has standard mounting points and total weight stays within capacity.
How do I level the display after installation?
Loosen the two main locking bolts slightly, adjust the display to center it, then re-tighten. Use a spirit level on the top of the screen to check alignment.
How do I clean and maintain the mount?
Wipe down the bracket and hardware with a dry microfiber cloth. For stubborn dust, use a slightly damp cloth. Never use abrasive cleaners or petroleum-based solvents as they may damage the black coating.
Are replacement parts available?
Yes, Middle Atlantic offers replacement kits with screws, spacers, washers and Allen keys. Contact technical support or visit the manufacturer's website with the model MW-VT.
Can I install the MW-VT outdoors?
No. This mount is rated for indoor use only. Exposure to moisture, salt air or extreme temperature swings can weaken the steel and void the warranty.
User questions about MW-VT Middle Atlantic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual MW-VT - Middle Atlantic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MW-VT by Middle Atlantic.