PW9500 - Video projector BENQ - Free user manual and instructions
Find the device manual for free PW9500 BENQ in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Video projector |
| Brand | BenQ |
| Model | PW9500 |
| Projection Technology | DLP |
| Native Resolution | WUXGA (1920 x 1200) |
| Brightness | 9000 ANSI lumens |
| Contrast Ratio | 6000:1 |
| Aspect Ratio | 16:10 native |
| Lens Shift | Vertical and horizontal shift range |
| Light Source | Lamp, 2000 hours normal mode |
| Dimensions (W x H x D) | 524 x 214 x 571 mm |
| Weight | 28 kg |
| Power Consumption | 1000W normal, 0.5W standby |
| Power Supply | AC 100-240V, 50/60Hz |
| Input Connections | HDMI, DVI-D, VGA, Component, S-Video, Composite, LAN |
| Output Connections | VGA monitor out, 12V trigger |
| Noise Level | 38 dB normal mode |
| Key Features | Edge blending, warping, color matching, multi-screen support |
| Maintenance | Clean air filters every 500 hours; top-cover lamp access |
| Security | Kensington lock, password protection, tamper-proof screws |
| Video Compatibility | NTSC, PAL, SECAM, HDTV |
| Operating Temperature | 0°C to 40°C |
| Standard Accessories | Remote control, power cable, user manual CD |
Frequently Asked Questions - PW9500 BENQ
How do I set up the BenQ PW9500 for the first time?
Place the projector on a stable surface, connect your video sources, and use the vertical lens shift to adjust the image. Power on and follow the on-screen setup wizard for aspect ratio and keystone.
What is the recommended throw distance for a 150-inch screen?
For a 150-inch image, the throw distance is approximately 5.4 to 7.2 meters depending on the lens. Check the projection table in the manual for your specific lens model.
How can I replace the projection lamp?
Turn off the projector and unplug it. Open the top lamp cover, unscrew the lamp module, and pull it out. Insert a new BenQ certified lamp, then reset the lamp timer via the menu.
How often should I clean the air filters?
Clean the air filters every 500 hours of use. In dusty environments, you may need to clean more frequently. The filter maintenance indicator will alert you when it is time.
Can I connect multiple computers to the projector?
Yes, the PW9500 has VGA, DVI-D, and HDMI inputs. Use the source selection button on the remote or control panel to switch between devices.
Is the BenQ PW9500 suitable for rear projection?
Yes, it supports rear projection. In the system setup menu, select 'Rear' for both horizontal and vertical modes to correct the image orientation.
What is the RS-232 control protocol for the PW9500?
The projector supports RS-232 commands for remote control. The command format is specified in the serial interface section of the manual, allowing on/off and input switching.
How do I perform a factory reset on the projector?
Go to System Setup > Reset in the OSD menu. Confirm to restore default settings, including picture, source, and network settings.
What happens if the projector overheats?
If the internal temperature exceeds safe limits, the projector will shut down automatically to protect the lamp and components. Ensure proper ventilation and filter cleaning to prevent this.
Can I use the projector with a standard extension cord?
It is recommended to connect the projector directly to a dedicated power outlet that provides 100-240V AC. Extension cords should be heavy-duty with adequate gauge to handle the power draw.
User questions about PW9500 BENQ
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video projector in PDF format for free! Find your manual PW9500 - BENQ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PW9500 by BENQ.
USER MANUAL PW9500 BENQ
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BENQ
Model : PW9500
Category : Video projector