WD-62827 - Television MITSUBISHI - Free user manual and instructions
Find the device manual for free WD-62827 MITSUBISHI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | DLP Rear Projection Television |
| Brand | Mitsubishi |
| Model | WD-62827 |
| Screen Size | 62 inches (16:9) |
| Native Resolution | 1920 x 1080 (1080p) |
| Display Technology | DLP (Digital Light Processing) |
| Contrast Ratio | 2000:1 |
| Brightness | 500 cd/m² |
| Input Terminals | HDMI, Component, Composite, S-Video, VGA, RF |
| Output Terminals | Audio out (analog), Optical out |
| Audio System | Built-in speakers, 10W x 2 |
| Total Power Consumption | 250 W |
| Power Supply | AC 120V, 60Hz |
| Dimensions (with stand) | 57.7" x 38.1" x 17.7" (W x H x D) |
| Weight | 95 lbs (43 kg) |
| Lamp Life | Up to 6000 hours (low power) |
| Lamp Type | Replaceable DLP lamp |
| Tuner | NTSC/ATSC |
| Remote Control | Included |
| Stand | Included (tabletop) |
| Cleaning | Use soft dry cloth; avoid chemicals |
| Safety | Ensure proper ventilation; do not cover vents |
| Repairability | User-replaceable lamp; internal service by qualified technicians |
| Operating Temperature | 41°F–95°F (5°C–35°C) |
Frequently Asked Questions - WD-62827 MITSUBISHI
How do I connect external devices like a Blu-ray player or gaming console?
For best picture quality, use an HDMI cable to connect your device to one of the HDMI inputs on the TV. If your device only has component or composite outputs, connect those and select the corresponding input from the Input menu.
The remote control is not working. What should I do?
Check the batteries first and replace them if needed. Make sure nothing is blocking the IR sensor on the TV. If the issue persists, try pressing the buttons on the side panel to verify the TV itself is functioning.
How do I replace the projector lamp on my Mitsubishi WD-62827?
The lamp is located under the top panel. Turn off and unplug the TV, allow it to cool down for at least 45 minutes. Remove the lamp cover, loosen the screws, and slide out the old lamp. Insert the new lamp, replace the cover, and press the Reset Lamp button in the menu.
What should I do if the picture is dim or flickering?
A dim image often means the lamp is nearing the end of its life. Check the lamp usage time in the Maintenance menu. Flickering can also be caused by loose cable connections – reseat all cables. If the problem continues, the lamp may need replacement.
Can I use the TV as a computer monitor?
Yes, the VGA (PC) input lets you connect a computer. Set the computer's resolution to 1920 × 1080 to match the TV's native resolution, and select the VGA input on the TV.
How do I access the channel menu and set up the built-in tuner?
Press the MENU button on the remote, then navigate to Channel Setup. Choose Auto Scan to search for available channels. The TV will list all digital and analog signals it finds.
Why is there no sound from the TV speakers?
First, ensure the mute button is not activated and the volume is turned up. If external speakers are connected, the TV may be set to External Audio. In the menu, select Audio Output and choose TV Speaker. Also check if the source device is sending audio.
How should I clean the screen of my Mitsubishi WD-62827?
Use a soft, lint-free microfiber cloth to gently wipe the screen from top to bottom. Do not spray water or any cleaning agents directly on the screen – instead, lightly dampen the cloth if necessary. Avoid paper towels, which can scratch the surface.
Does this TV support wall mounting?
No, the WD-62827 is a rear projection television and is not designed for wall mounting. The included stand base must be used on a sturdy, level surface. Moving or lifting the TV should be done by two people due to its size and weight.
Where can I find user instructions and spare parts?
The user manual is included with the TV and can also be found online at notice-facile.com. For spare parts such as the remote control or lamp, contact Mitsubishi authorized service centers or search online with the model number WD-62827.
User questions about WD-62827 MITSUBISHI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Television in PDF format for free! Find your manual WD-62827 - MITSUBISHI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WD-62827 by MITSUBISHI.