PULSAR

SF116 - Uncategorized PULSAR - Free user manual and instructions

Find the device manual for free SF116 PULSAR in PDF.

📄 5 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice PULSAR SF116 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Digital Wristwatch
Model Number SF116
Brand Pulsar
Display LCD Digital Display
Case Diameter 40 mm (approx)
Case Thickness 10 mm (approx)
Strap Width 20 mm (approx)
Weight 50 g (approx)
Battery Type CR2025 lithium battery
Battery Life 2 years (approx)
Water Resistance 3 ATM (splash resistant)
Functions Time, Date, Alarm, Chronograph, Backlight
Time Format 12/24 hour selectable
Backlight LED with auto-off
Case Material Stainless steel
Glass Material Mineral glass
Strap Material Flexible silicone
Care Instructions Wipe with a soft dry cloth
Operating Temperature 0°C to 50°C
Warranty 1 year limited warranty

Frequently Asked Questions - SF116 PULSAR

How do I set the time on my Pulsar SF116?
Press the MODE button to navigate to the time screen. Press and hold the SET button until the seconds flash. Use the START/STOP button to adjust the value, and the RESET button to move to the next field. Press SET again to save and exit.
How do I change the battery?
Use a small screwdriver to remove the back cover. Gently lift the old battery out and replace it with a new CR2025 lithium battery, ensuring the positive side faces up. Reattach the back cover and press firmly until it snaps into place. Avoid touching the battery contacts with bare fingers.
Is the watch water resistant?
Yes, the Pulsar SF116 has a water resistance rating of 3 ATM. It can withstand splashes and short immersion in water (up to 30 meters), but it is not suitable for swimming, diving, or high-pressure water activities.
How do I use the chronograph (stopwatch)?
To use the chronograph, press the MODE button until you reach the CHR display. Press START/STOP to begin timing and press it again to stop. Press RESET to set the chronograph back to zero. The chronograph can measure up to 59 minutes and 59.99 seconds.
How do I set the alarm?
Press the MODE button to select the ALM screen. Press and hold SET until the hour digits flash. Use START/STOP to adjust the hour and RESET to switch to minutes. After setting, press SET to confirm. To turn the alarm on/off, press START/STOP on the alarm screen.
What type of battery does the SF116 use?
The Pulsar SF116 uses a CR2025 lithium coin cell battery. This battery is widely available and should last approximately 2 years under normal use. Replace the battery when the display becomes dim or the backlight weakens.
How do I adjust the date?
Press the MODE button to the date display. Press and hold SET until the year flashes. Use START/STOP to change the value and RESET to move to month and day. Press SET to save the settings. The date will automatically update based on the calendar.
The display is dim, what should I do?
A dim display usually indicates a low battery. To restore full visibility, replace the CR2025 battery as described in the manual. If the display remains dim after replacement, check the battery contacts for corrosion and clean them gently with a soft cloth.
How do I change the watch strap?
To replace the strap, use a spring bar tool or a small flathead screwdriver to compress the spring bar and release the strap from the lugs. Slide the new strap into place and ensure the spring bar clicks into the holes. The SF116 uses a standard 20mm width strap.
Where can I find the user manual for the Pulsar SF116?
The user manual can be downloaded for free from notice-facile.com in PDF format. You can also find it on the official Pulsar website under the support section. Keep the manual accessible for future reference on setting adjustments and maintenance.

User questions about SF116 PULSAR

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Uncategorized in PDF format for free! Find your manual SF116 - PULSAR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SF116 by PULSAR.

USER MANUAL SF116 PULSAR

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : PULSAR

Model : SF116

Category : Uncategorized