B14DBE - Server Supermicro - Free user manual and instructions
Find the device manual for free B14DBE Supermicro in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rack Server |
| Brand | Supermicro |
| Model | B14DBE |
| Form Factor | 1U Rackmount |
| Dimensions (W x H x D) | 437 x 43 x 597 mm (17.2 x 1.7 x 23.5 in) |
| Weight | 12.7 kg (28 lbs) |
| Power Supply | Redundant 800W Platinum |
| Processor Support | Dual Intel Xeon Scalable (3rd Gen) |
| Memory Support | 16 DIMM slots, DDR4 ECC up to 4TB |
| Storage Support | 8x 2.5" hot-swap SATA/SAS/NVMe |
| Expansion Slots | 2x PCIe 4.0 x16, 2x PCIe 4.0 x8 |
| Networking | 2x 10GbE RJ45, 1x IPMI dedicated LAN |
| Management | IPMI 2.0 with KVM over IP |
| Cooling | 5x heavy duty redundant fans |
| Operating Temperature | 10°C to 35°C (50°F to 95°F) |
| Safety Compliance | FCC, CE, UL |
| Cleaning | Use compressed air; avoid liquids |
| Maintenance | Hot-swappable drives and redundant PSU |
| Repair Support | Spare parts via authorized distributors |
| Included Accessories | Power cords, rail brackets, quick guide |
Frequently Asked Questions - B14DBE Supermicro
What processors are compatible with the Supermicro B14DBE server?
The B14DBE supports dual Intel Xeon Scalable (3rd Gen) processors, providing up to 40 cores per socket for high performance computing.
How do I access the remote management interface?
Connect to the dedicated IPMI LAN port and assign an IP address. Use a web browser to access the IPMI 2.0 interface for remote monitoring and management.
Can I install standard DDR4 memory modules?
No, the server requires ECC DDR4 memory. Regular non-ECC DIMMs are not supported and may cause system instability.
How can I update the BIOS or IPMI firmware?
Download the latest firmware from the Supermicro Support Portal. Use the IPMI web interface or a bootable USB drive to update the BIOS.
What is the recommended operating temperature range?
The recommended ambient temperature is 10°C to 35°C (50°F to 95°F). Ensure proper airflow and cooling to prevent overheating.
How do I reset the IPMI password to factory default?
To reset the IPMI settings, locate the JPB1 jumper on the motherboard. Power off the server, short the jumper, then power on to clear the configuration.
Are the hard drive bays hot-swappable?
Yes, the 8x 2.5" drive bays are hot-swappable for SATA, SAS, and NVMe drives, allowing drive replacement without shutting down the server.
How do I connect to the network for remote management?
Use the dedicated IPMI LAN port for out-of-band management. The two 10GbE ports provide data network connectivity for the operating system.
What is the power supply configuration for redundancy?
The server supports redundant 800W Platinum power supplies. They can operate in a hot-swap configuration to ensure continuous uptime.
Does the server support NVMe drives without adapters?
Yes, some drive bays support NVMe drives directly via SFF-8639 connectors, providing high-speed storage without additional adapters.
User questions about B14DBE Supermicro
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual B14DBE - Supermicro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. B14DBE by Supermicro.
USER MANUAL B14DBE Supermicro
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Supermicro
Model : B14DBE
Category : Server