HHa/X - Uncategorized Lectrosonics - Free user manual and instructions
Find the device manual for free HHa/X Lectrosonics in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Handheld wireless microphone transmitter |
| Brand | Lectrosonics |
| Model | HHa/X |
| RF Frequency Range | UHF 470-614 MHz |
| Tuning Bandwidth | 25 MHz |
| RF Output Power | 50 mW (switchable to 10 mW) |
| Modulation Type | Digital Hybrid |
| Audio Input | Built-in electret condenser capsule (interchangeable) |
| Frequency Response | 40 Hz - 20 kHz |
| Battery Type | 2 x AA alkaline or NiMH |
| Battery Life | Up to 10 hours (alkaline) |
| Display | Backlit LCD |
| Controls | Power, Menu, Up, Down, Set |
| Antenna | Internal |
| Housing Material | High-impact ABS plastic |
| Dimensions | 1.5 x 8.5 in (38 x 216 mm) |
| Weight | 9.5 oz (270 g) with batteries |
| Operating Temperature | -20°C to 50°C |
| Storage Temperature | -30°C to 70°C |
| Spare Parts | Battery cover, microphone capsule, replacement AA battery tray |
| Serviceability | User-replaceable batteries and capsule |
| Safety Compliance | FCC Part 15, CE approved |
Frequently Asked Questions - HHa/X Lectrosonics
How do I turn on the HHa/X transmitter?
Press and hold the power button until the LCD lights up. The unit will start transmitting on the last used frequency. Make sure batteries are installed.
How do I change the frequency on the HHa/X?
Press the Menu button, navigate to Frequency, use Up/Down to select the desired frequency within the tuning range, then press Set to confirm.
How do I pair the HHa/X with a Lectrosonics receiver?
Use the IR sync function or manually set the receiver to the same frequency group and channel as the transmitter. Consult both manuals for details.
How do I adjust the audio input gain?
In the Menu, select Audio Gain and adjust in -1 dB steps. Use the DIP switches on the battery compartment for additional gain trim.
What batteries are recommended?
Use two AA alkaline batteries for good power output and life. NiMH rechargeable batteries can also be used, but keep in mind they produce a lower voltage.
How long does a set of batteries last?
With 2 AA alkaline cells, expect up to 10 hours of continuous use at 50 mW RF power. Rechargeable NiMH batteries may last slightly less.
How should I clean the HHa/X?
Wipe the exterior with a dry, soft cloth. Do not use solvents or abrasive cleaners. Keep the microphone capsule free of dust and moisture.
Can I use an external microphone with the HHa/X?
Yes. The HHa/X has a 3.5mm input jack that accepts Lectrosonics MPA-style lavaliere microphones. In the Menu, select the appropriate input source.
How do I reset the transmitter to factory settings?
Press and hold Menu for 5 seconds, then select Reset. Confirm the action to restore all defaults.
How do I mute the transmitter temporarily?
Press and release the power button quickly to mute. The LCD shows a mute icon. Press again to unmute.
User questions about HHa/X Lectrosonics
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual HHa/X - Lectrosonics and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HHa/X by Lectrosonics.
USER MANUAL HHa/X Lectrosonics
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Lectrosonics
Model : HHa/X
Category : Uncategorized