USB5926C - Uncategorized Microchip - Free user manual and instructions
Find the device manual for free USB5926C Microchip in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | USB 3.1 Gen 2 Hub Controller |
| Brand | Microchip Technology |
| Model | USB5926C |
| Category | Integrated Circuit (IC) |
| Package Type | 100-pin QFN (Quad Flat No-lead) |
| Package Dimensions | 14 mm x 14 mm |
| Weight | Approximately 2 grams |
| Number of Downstream Ports | 4 |
| USB Standard | USB 3.1 Gen 2 (10 Gbps) |
| Data Transfer Rate | Up to 10 Gbps per port |
| Power Delivery | USB Power Delivery 3.0 support |
| Supply Voltage | 3.3 V (core) / 5 V (I/O) |
| Operating Temperature | 0°C to 70°C |
| Storage Temperature | -40°C to 85°C |
| Main Functions | Hub controller for USB 3.1, supports SuperSpeed, SuperSpeed+, and legacy USB devices |
| Compliance | USB 3.1, USB 2.0, and USB 1.1 backward compatible |
| Maintenance and Cleaning | No specific maintenance required; handle with ESD precautions during installation |
| Safety | Industrial grade ESD protection on all USB pins |
| Spare Parts and Repairability | Repair only by qualified technicians; no user-serviceable parts |
| General Information | Designed for embedded applications, docking stations, and high-speed expansion |
Frequently Asked Questions - USB5926C Microchip
What is the USB5926C chip used for?
The USB5926C is a high-speed USB 3.1 Gen 2 hub controller from Microchip. It adds four downstream USB ports to a host system, enabling data transfer rates up to 10 Gbps per port.
How many devices can the USB5926C support?
The USB5926C provides 4 downstream USB ports. With additional cascaded hubs, it can support more devices, but natively it handles four direct connections.
Is the USB5926C compatible with older USB devices?
Yes, the USB5926C is backward compatible with USB 2.0 and USB 1.1 devices. It automatically negotiates the appropriate data rate for each connected device.
What power supply does the USB5926C require?
The chip typically operates with a 3.3V core voltage and 5V I/O voltage. Power can be supplied from the upstream USB host or an external regulator depending on the application circuit.
Can the USB5926C support USB Power Delivery?
Yes, the USB5926C integrates USB Power Delivery 3.0 support, allowing it to manage power contracts for charging devices such as laptops, tablets, and phones.
How do I install the USB5926C in my design?
The USB5926C is a surface-mount QFN integrated circuit. It requires proper PCB layout, decoupling capacitors, and a crystal or oscillator. Refer to the datasheet for a recommended circuit and layout guidelines.
Is there any software or driver needed for the USB5926C?
The USB5926C is a hardware-oriented hub controller. Most operating systems have built-in USB hub support, so no additional drivers are required for standard operation. Custom firmware may be needed for specific configuration.
What is the maximum data transfer speed of the USB5926C?
Each downstream port supports SuperSpeed+ at 10 Gbps, enabling total throughput of up to 40 Gbps across the four ports (subject to host controller capabilities and bus overhead).
What is the operating temperature range for the USB5926C?
The chip is rated for a commercial temperature range of 0°C to 70°C, making it suitable for typical indoor electronics, consumer devices, and IT equipment.
Where can I find the full user manual or datasheet for the USB5926C?
The full manual is available in PDF format on notice-facile.com. You can also visit the official Microchip website for the complete datasheet and application notes.
User questions about USB5926C Microchip
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual USB5926C - Microchip and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. USB5926C by Microchip.
USER MANUAL USB5926C Microchip
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Microchip
Model : USB5926C
Category : Uncategorized