ARMCBCLB - Flat Panel Mount StarTech.com - Free user manual and instructions
Find the device manual for free ARMCBCLB StarTech.com in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Articulating Monitor Mount (Desk Clamp) |
| Mounting Style | Clamp-on / C-clamp (desk edge) |
| VESA Mounting Standards | 75 x 75 mm and 100 x 100 mm |
| Compatible Monitor Size | 17 to 32 inches (diagonal) |
| Load Capacity | 10 kg (22 lbs) |
| Tilt Range | -5° to +15° |
| Swivel Range | 180° |
| Monitor Rotation | 360° (portrait/landscape) |
| Articulation Arm | Yes, multi-point adjustable |
| Height Adjustment | Yes, via arm and clamp post |
| Desktop Thickness Capacity | 10 to 50 mm (0.4 to 2 in) |
| Clamp Opening | C-clamp included |
| Cable Management | Integrated cable routing grooves |
| Material | Steel and high-strength aluminum alloy |
| Finish | Durable powder-coated surface |
| Color | Black |
| Dimensions (W x H x D) | 110 x 300 x 150 mm (4.3 x 11.8 x 5.9 in) |
| Weight | 2.4 kg (5.3 lbs) |
| Power Supply | None (passive mount) |
| Safety Features | Anti-slip rubber padding protects desk surface |
| Maintenance | Clean with a soft, dry cloth; avoid harsh chemicals |
| Repairability | Replacement hardware available; contact StarTech.com support |
| Warranty | 5 years |
| Package Contents | Mount arm, desk clamp, VESA bracket, mounting hardware, user manual |
Frequently Asked Questions - ARMCBCLB StarTech.com
How do I determine if my monitor is compatible with the ARMCBCLB mount?
Check that your monitor has VESA 75x75mm or 100x100mm mounting holes and weighs less than 10 kg (22 lbs). Your monitor screen size should be between 17 and 32 inches for optimal balance.
What is the maximum weight capacity of this desk mount?
The maximum load capacity is 10 kg (22 lbs). Do not exceed this weight to avoid damaging the mount or your monitor.
Can I mount a 35-inch monitor with this arm?
The recommended size is 17 to 32 inches. A 35-inch monitor may be too large and unbalanced even if the VESA pattern matches. We advise staying within the specified range unless you verify the weight is below 10 kg.
How do I install the clamp mount on my desk?
Position the C-clamp over the desk edge, adjust the clamp width to fit your desk thickness (up to 50 mm), and tighten the knob until secure. Use the anti-slip rubber pad to protect the desk surface.
Does the ARMCBCLB allow portrait (vertical) monitor orientation?
Yes, the mount includes 360-degree rotation, so you can easily switch between landscape and portrait orientation.
How can I keep my cables organized with this mount?
The arm features integrated cable management channels along the arm. Run your monitor cables through the routing grooves to keep them out of sight and tangle-free.
What tools are required for installation?
Most of the assembly can be done by hand. A Phillips screwdriver is typically needed for the VESA bracket attachment and the arm joint adjustments.
Can the mount be attached to a glass desk?
Yes, but with caution. The clamp applies significant pressure. Ensure the glass is reinforced and thick enough. We recommend using a distribution plate or checking with your desk manufacturer first.
Can I use this mount on a wall instead of a desk?
No, the ARMCBCLB is designed specifically for desk-edge clamping. For wall mounting, consider StarTech.com's wall mount arm models.
How do I adjust the tension of the monitor arm?
Locate the hex key adjustment bolts at the arm joints. Loosen or tighten them to control the friction and hold the monitor in the desired position without drifting.
User questions about ARMCBCLB StarTech.com
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Flat Panel Mount in PDF format for free! Find your manual ARMCBCLB - StarTech.com and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ARMCBCLB by StarTech.com.