SR-IMPV2 - Uncategorized Impact - Free user manual and instructions
Find the device manual for free SR-IMPV2 Impact in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Impact |
| Model | SR-IMPV2 |
| Product Type | 2-Channel Car Audio Amplifier |
| Number of Channels | 2 |
| Peak Power Output | 1200 Watts |
| RMS Power Output | 300 Watts x 2 @ 4 ohms |
| Bridged Power Output | 600 Watts x 1 @ 4 ohms |
| Frequency Response | 10 Hz - 30 kHz |
| Input Sensitivity | 200 mV - 6 V |
| Signal-to-Noise Ratio | > 90 dB |
| Power Supply | 12V DC (negative ground) |
| Dimensions (W x H x D) | 310 x 190 x 50 mm |
| Weight | 1.8 kg |
| Speaker Impedance | 2 - 8 ohms |
| Crossover Filters | Low-pass, high-pass, full-range |
| Bass Boost | 0 - 18 dB @ 45 Hz |
| Inputs | Low-level (RCA) and high-level (speaker) |
| Protection Features | Short-circuit, over-voltage, thermal |
| Cooling System | Heatsink and thermal shutdown |
| Cleaning and Maintenance | Wipe with dry cloth only |
| Safety Precautions | Disconnect battery before installation; use correct fuse |
| Spare Parts and Repairability | Not user-serviceable; consult a technician |
| Manual Language | English (EN) |
| Manual Pages | 4 |
Frequently Asked Questions - SR-IMPV2 Impact
What is the Impact SR-IMPV2?
The Impact SR-IMPV2 is a 2-channel car audio amplifier designed to boost the signal from your head unit to your speakers.
How much power does the SR-IMPV2 deliver?
It delivers 300 watts RMS per channel at 4 ohms and up to 1200 watts peak for powerful sound.
Can I bridge the amplifier?
Yes, you can bridge the two channels to produce 600 watts RMS mono at 4 ohms, ideal for a subwoofer.
Does it work with factory stereos?
Yes, it features high-level speaker inputs so you can connect it without replacing your factory radio.
How do I adjust the gain?
Use a small screwdriver on the gain control knob to match the input sensitivity of your source unit.
Does the amplifier have a bass boost?
Yes, it has an adjustable bass boost up to 18 dB at 45 Hz for extra low-end impact.
What size fuse should I use with the SR-IMPV2?
We recommend a 30A fuse with a proper wiring kit for safe operation.
How do I clean and maintain the amplifier?
Wipe the exterior with a dry antistatic cloth and ensure the heat sink is free of dust to prevent overheating.
What protection features does it have?
It includes short-circuit, over-voltage, and thermal protection to safeguard the amplifier and your system.
Can I repair the amplifier myself if it fails?
The amplifier contains no user-serviceable parts; please contact a qualified technician for service.
User questions about SR-IMPV2 Impact
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual SR-IMPV2 - Impact and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SR-IMPV2 by Impact.
USER MANUAL SR-IMPV2 Impact
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Impact
Model : SR-IMPV2
Category : Uncategorized