M-THUMP5-1000 - Measurement Megger - Free user manual and instructions
Find the device manual for free M-THUMP5-1000 Megger in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Cable fault locator / surge generator |
| Brand | Megger |
| Model | M-THUMP5-1000 |
| Output voltage | 0 to 5 kV (adjustable) |
| Energy output | Up to 1000 joules |
| Power supply | 100–240 V AC, 50/60 Hz |
| Display | Digital display for voltage and energy |
| Controls | Push-button operation with safety interlock |
| Dimensions (approx.) | 55 × 40 × 35 cm |
| Weight (approx.) | 30 kg |
| Enclosure | Rugged, weather-resistant case |
| Safety features | Internal discharge circuit, high-voltage interlocks |
| Maintenance | Keep clean, inspect cables and connections regularly |
| Included accessories | Output cables, ground cable, user manual |
| Standards | Designed to meet IEC/EN safety standards |
| Warranty | 1 year manufacturer warranty |
Frequently Asked Questions - M-THUMP5-1000 Megger
What is the purpose of the Megger M-THUMP5-1000?
The M-THUMP5-1000 is a cable fault locator and surge generator used to test and diagnose faults in medium-voltage cables. It delivers high-voltage surges to pinpoint the location of insulation failures or breaks.
What safety precautions should I take before using the device?
Always ensure the device is grounded and the cable under test is disconnected from power. Use appropriate personal protective equipment (PPE) and follow the interlock procedures. Never touch the output terminals while the unit is energized.
How do I connect the M-THUMP5-1000 to the cable under test?
Connect the output cable to the faulty phase, and the ground cable to the system ground. Ensure all connections are secure and rated for the voltage and energy levels. Refer to the manual for exact connection diagrams.
How do I perform a surge test on a cable?
Set the desired output voltage and energy level using the front panel controls. Press the test button to apply the surge. Observe the display for any reflection or breakdown, which indicates the fault distance.
What maintenance does the M-THUMP5-1000 require?
Regularly inspect the output cables and connections for wear or damage. Clean the exterior with a dry cloth. Periodically verify the calibration and check the internal discharge circuit for proper operation.
What is the maximum cable length that can be tested?
The maximum length depends on cable type and capacitance. With a 5 kV output and up to 1000 joules, you can typically test cables up to several kilometers. Consult the manual for specific limits.
Does the device have a discharge function?
Yes, the M-THUMP5-1000 includes a built-in discharge circuit that automatically discharges the cable and the internal capacitors after each test, ensuring safe handling.
Can I adjust the output voltage for different test requirements?
Absolutely, the output voltage is fully adjustable from 0 to 5 kV, allowing you to select the appropriate test level based on cable insulation rating and fault conditions.
How is the surge energy controlled?
The energy output is adjustable in discrete steps up to 1000 joules. The device uses a capacitor bank that is charged to the voltage setpoint, and the discharge energy is determined by the capacitance and voltage.
What should I do if the device will not power on?
Check the power cord and fuse. Ensure the input voltage matches the supply. If the unit still does not power up, contact Megger support for repair or calibration, as internal components may be faulty.
User questions about M-THUMP5-1000 Megger
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measurement in PDF format for free! Find your manual M-THUMP5-1000 - Megger and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. M-THUMP5-1000 by Megger.
USER MANUAL M-THUMP5-1000 Megger
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Megger
Model : M-THUMP5-1000
Category : Measurement