Cinema Vision CVIW50 - Audio/Video JBL - Free user manual and instructions
Find the device manual for free Cinema Vision CVIW50 JBL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | In-wall loudspeaker |
| Brand | JBL |
| Model | Cinema Vision CVIW50 |
| Speaker design | 2-way |
| Woofer size | 5.25 in (133 mm) |
| Tweeter size | 1 in (25 mm) silk dome |
| Application | Home theater or stereo system |
| Nominal impedance | 8 ohms |
| Frequency response | 55 Hz – 20 kHz |
| Sensitivity | 88 dB (2.83 V/1 m) |
| Recommended amplifier power | 15 – 100 W |
| Power handling (RMS) | 75 W |
| Peak power handling | 150 W |
| Connections | Spring-loaded wire terminals |
| Mounting type | In-wall (recessed) |
| Cutout dimensions | 7.9 x 10.6 in (201 x 269 mm) |
| Product weight | 3.1 lb (1.4 kg) |
| Finish | White (paintable grille) |
| Safety compliance | UL and CE listed |
| Cleaning and maintenance | Wipe with soft dry cloth; do not use liquids |
| Spare parts and repair | Available through JBL service centers |
Frequently Asked Questions - Cinema Vision CVIW50 JBL
What is the recommended amplifier power for the JBL Cinema Vision CVIW50?
The recommended amplifier power is 15 to 100 watts per channel. Exceeding this range may damage the speakers.
How do I install the CVIW50 in a wall?
Use the included mounting template to draw the cutout outline, cut the drywall, route the speaker wires, then insert the speaker and tighten the mounting clamps.
Can I paint the speaker grille?
Yes, the grille is paintable. Use a thin, even coat of spray paint to avoid clogging the holes.
How do I connect the speaker wire?
Strip 1/4 inch of insulation, press the spring-loaded terminal, insert the bare wire, and release. Ensure the positive and negative are matched.
What is the impedance and can I use two pairs?
The nominal impedance is 8 ohms. You can connect two pairs in parallel only if your amplifier supports 4-ohm loads; otherwise, use a speaker selector.
How should I clean the speaker?
Wipe the grille and frame with a soft, dry cloth. Do not use water, solvents, or abrasive cleaners.
What if I hear distortion or rattling?
Check for loose wire connections, nearby objects touching the speaker, or overallocating power. Also ensure the grille is seated properly.
Is this speaker suitable for home theater surround sound?
Yes, its two-way design and wide frequency response make it ideal for surround, rear, and side channels.
Does the CVIW50 come with a warranty?
JBL offers a 5-year limited warranty for in-wall speakers. Keep your purchase receipt.
What is the depth requirement for the wall cavity?
The mounting depth is approximately 3.5 inches (89 mm). Ensure the wall cavity has enough depth and clearance for the speaker.
User questions about Cinema Vision CVIW50 JBL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Audio/Video in PDF format for free! Find your manual Cinema Vision CVIW50 - JBL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Cinema Vision CVIW50 by JBL.
USER MANUAL Cinema Vision CVIW50 JBL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : JBL
Model : Cinema Vision CVIW50
Category : Audio/Video