DPDM-Q-20-50-PA - Uncategorized Festo - Free user manual and instructions
Find the device manual for free DPDM-Q-20-50-PA Festo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Pneumatic guided cylinder |
| Manufacturer | Festo |
| Model | DPDM-Q-20-50-PA |
| Bore Size | 20 mm |
| Stroke Length | 50 mm |
| Operating Pressure | 0.2 to 0.8 MPa |
| Maximum Speed | 0.8 m/s |
| Operating Temperature | -10 °C to +60 °C |
| Piston Rod Material | Stainless steel, corrosion resistant |
| Housing Material | Anodized aluminum |
| Seal Material | Nitrile rubber (NBR) |
| Mounting Type | Direct mounting via through holes |
| Port Connection | G1/8 (optional M5 via adapter) |
| Weight | 0.7 kg |
| Cushioning | Adjustable at both ends |
| Medium | Filtered, lubricated or unlubricated compressed air |
| Maintenance | Inspect seals annually and replace if worn |
| Cleaning | Use a dry lint-free cloth; avoid solvents |
| Safety Warning | Disconnect air supply before servicing |
| Reparability | Repairable; spare parts available |
Frequently Asked Questions - DPDM-Q-20-50-PA Festo
What is the operating pressure range for the DPDM-Q-20-50-PA?
The recommended operating pressure is 2 to 8 bar (0.2 to 0.8 MPa). Exceeding this range can damage the cylinder.
How do I mount this cylinder?
Mount the cylinder using the through holes on the housing. For easier alignment, use optional foot brackets. Ensure the axis is aligned with the load.
What kind of air conditioning is required?
Use filtered compressed air, either lubricated or unlubricated. If lubricated, use an ISO VG32 oil mist. Water and dust must be removed.
How can I adjust the cushioning?
Turn the adjustable cushioning screws at both end caps. Clockwise increases cushioning, counterclockwise reduces it. Set according to load and speed.
Is this cylinder suitable for perpendicular force?
Yes, it can handle side forces if the bearing is adequately rated, but for high side loads, use guides to extend service life.
How to replace the piston seal?
Disassemble end caps, remove piston rod, replace the seal kit and re-grease with Festo-approved grease. Reassemble carefully and test.
What is the maximum operating speed?
The maximum recommended speed is 0.8 m/s. Higher speeds may require additional cushioning or shock absorbers.
Can the cylinder work in extreme temperatures?
It operates in -10°C to +60°C. For lower or higher temperatures, consult factory for custom seals.
How to troubleshoot if the cylinder does not move?
Check the air supply pressure, control valve, and for both supply and exhaust restrictions. Also verify that the load is within the cylinder's force capacity.
Where can I find the datasheet and drawing?
The product manual includes basic dimensions. For detailed technical drawings, visit the Festo website and use the product code.
User questions about DPDM-Q-20-50-PA Festo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual DPDM-Q-20-50-PA - Festo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DPDM-Q-20-50-PA by Festo.
USER MANUAL DPDM-Q-20-50-PA Festo
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Festo
Model : DPDM-Q-20-50-PA
Category : Uncategorized